UM1811 datasheet(13/52 Pages) STMICROELECTRONICS

13 / 52 page

DocID026814 Rev 1

13/52

UM1811

G3LIB menu

4.1

G3LIB root menu

The G3LIB root menu allows to configure the G3-PLC library implementation and to get

access to features not specified by the G3 protocol.

Figure 7. G3LIB root panel

The G3LIB main menu contains two areas. The first one (1) comprises the commands

useful to configure the host interface application:



HI-MODE-SET.Request: this command sets the G3-PLC platform working mode.



HI-MODE-GET.Request: this command gets the operational mode of the host interface

application.



HI-STATE-GET.Request: this command performs a basic action to test the connection

with the board.



HI-HWRESET.Request: this command performs a system reset of the device.

The second area includes (2) all the commands related to the G3 library configuration. The

following commands are available:



G3LIB-TESTMODE.Request: this command enables or disables a specific test mode

used for G3-PLC library verification, which normally is not useful for the user.



G3LIB-GET.Request: this command is used to get the value of one attribute of the G3-

PLC ST library.



G3LIB-SET.Request: this command is used to set the value of one attribute of the G3-

PLC ST library.

UM1811 数据表(PDF) 13 Page - STMicroelectronics