UM1811 datasheet(44/52 Pages) STMICROELECTRONICS

部件名	UM1811

功能描述	G3-PLC graphical user interface

PDF	52 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

44 / 52 page

Basic G3 operations

UM1811

44/52

DocID026814 Rev 1

Figure 32. Configure Node 1 in TX

For the Node 2, as shown in Figure 32, go into the PHY menu / PLME_Control panel (1) to

configure the state of the node. Check the TXOFF_RXON (2) parameter and click on the

PLME_SET_TRX_STATE.Request button (3).

Figure 33. Configure Node 2 in RX

Now that the boards are plugged in the mains and the setup has been completed, data can

be sent at the PHY level, as represented in Figure 33. To do this, go to the PHY root menu

of the Node 1. Select the payload type to be ASCII (1), write the “TEST” string in the free

text area (2) and click on the PD_DATA.Request button (3).

In the trace window, it is possible to check that the Node 2 has received the data message

by checking that the PD_DATA.Indication message returned the SUCCESS status.

UM1811 数据表(PDF) 44 Page - STMicroelectronics