UTDA8024

Preliminary

LINEAR INTEGRATED CIRCUIT

UNISONICTECHNOLOGIESCO.,LTD

14 of 15

www.unisonic.com.tw

QW-R113-014.a



TYPICAL APPLICATION CIRCUIT

Notes: 1. These capacitors must be of the low ESR-type and be placed near the IC (within 100mm).

3. Make short, straight connections between CGND, C5 and the ground connection to the capacitor.

5. Mount one low ESR-type 100 or 220nF capacitor close to C1 contact (less than 100mm from it).

6. The connection to C3 should be routed as far from C2, C7, C4 and C8 and, if possible, surrounded by

grounded tracks.

connected to ground.