| 数据搜索系统,热门电子元器件搜索 |
|
NOIP1FN016KA-GDI 数据表(PDF) 21 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
NOIP1FN016KA-GDI 数据表(HTML) 21 Page - ON Semiconductor |
|
21 / 87 page ![]() NOIP1SN025KA, NOIP1SN016KA, NOIP1SN012KA, NOIP1SN010KA www.onsemi.com 21 Sensor Configuration This device contains multiple configuration registers. Some of these registers can only be configured while the sensor is not acquiring images (while register 192[0] = 0), while others can be configured while the sensor is acquiring images. For the latter category of registers, it is possible to distinguish the register set that can cause corrupted images (limited number of images containing visible artifacts) from the set of registers that are not causing corrupted images. These three categories are described here. Static Readout Parameters Some registers are only modified when the sensor is not acquiring images. Reconfiguration of these registers while images are acquired can cause corrupted frames or even interrupt the image acquisition. Therefore, it is recommended to modify these static configurations while the sequencer is disabled (register 192[0] = 0). The registers are shown in Table 14. Table 14 should not be reconfigured during image acquisition. A specific configuration sequence applies for these registers. Refer to the operation flow and startup description. Table 14. STATIC READOUT PARAMETERS Group Addresses Description Clock generator 32 Configure according to recommendation Image core 40 Configure according to recommendation AFE 48 Configure according to recommendation Bias 64–71 Configure according to recommendation LVDS 112 Configure according to recommendation Sequencer mode selection 192 • triggered_mode • slave_mode All reserved registers Keep reserved registers to their default state, unless otherwise described in the recommendation Dynamic Configuration Potentially Causing Image Artifacts The category of registers as shown in Table 15 consists of configurations that do not interrupt the image acquisition process, but may lead to one or more corrupted images during and after the reconfiguration. A corrupted image is an image containing visible artifacts. A typical example of a corrupted image is an image which is not uniformly exposed The effect is transient in nature and the new configuration is applied after the transient effect. Table 15. DYNAMIC CONFIGURATION POTENTIALLY CAUSING IMAGE ARTIFACTS Group Addresses Description Black level configuration 128–129 197[12:8] Reconfiguration of these registers may have an impact on the black-level calibration algorithm. The effect is a transient number of images with incorrect black level compensation. Sync codes 129[13] 116–126 Incorrect sync codes may be generated during the frame in which these registers are modified. Datablock test configurations 144–150 Modification of these registers may generate incorrect test patterns during a transient frame. Dynamic Readout Parameters It is possible to reconfigure the sensor while it is acquiring images. Frame-related parameters are internally resynchronized to frame boundaries, such that the modified parameter does not affect a frame that has already started. However, there can be restrictions to some registers as shown in Table 16. Some reconfiguration may lead to one frame being blanked. This happens when the modification requires more than one frame to settle. The image is blanked out and training patterns are transmitted on the data and sync channels. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |