| 数据搜索系统,热门电子元器件搜索 |
|
AX88140AP 数据表(PDF) 24 Page - ASIX Electronics Corporation |
|
|
|||||||||||||||||||||||||||||
AX88140AP 数据表(HTML) 24 Page - ASIX Electronics Corporation |
|
24 / 46 page ![]() AX88140A PRELIMINARY ASIX ELECTRONICS CORPORATION 24 3 R/W/C TJT - Transmit Jabber Time-out Indicates that the transmit jabber timer expired, meaning that the AX88140A transmitter had been excessively active. The transmission process is aborted and placed in the stopped state. This event causes the transmit jabber time-out TDES0<14> is set. 2 R/W/C TU - Transmit Buffer Unavailable Indicates that the next descriptor on the transmit list is owned by the host and cannot be acquired by the AX88140A.The transmission process is suspended. To resume processing transmit descriptors, the host should change the ownership bit of the descriptor and then issue a transmit poll demand command. 1 R/W/C TPS - Transmit Process Stopped Asserts when the transmit process enters the stopped state. 0 R/W/C TI - Transmit Interrupt Indicates that a frame transmission was completed, while TDES1<31> is asserted in the first descriptor of the frame. Tab - 20 REG5 Status Register Description 4.2.7 Operation Mode Register (REG6) 1. REG6 establishes the receive and transmit operating modes and commands. 2. REG6 should be the last REG to be written as part of initialization. Field R/W/C Description 31 - Reserved 1 All incoming packets will be received 30 R/W RA - Receive All 0 Filtering mode 29:25 - Reserved.--Written as “0” for future compatibility concern. 1 Enable Scrambler 24 R/W SCR - Scrambler Mode 0 Disable Scrambler 1 PCS functions are active 23 R/W PCS - PCS Mode 0 MII/SYM port is not selected 1 Threshold is 10Mb/s 22 R/W TTM - Transmit Threshold Mode 0 Threshold is 100Mb/s 1 Enable Store and Forward 21 R/W SF - Store and Forward 0 Disable Store and Forward 20 - Reserved.--Written as “0” for future compatibility concern. 1 Heartbeat Disable 19 R/W HBD - Heartbeat Disable 0 Heartbeat Enable 1 MII/SYM port is selected. 18 R/W PS - Port Select 0 SRL port is selected 17:16 - Reserved.--Written as “0” for future compatibility concern. TR - Threshold Control Bits The threshold value has a direct impact on the AX88140A bus arbitration scheme . Transmission starts when the frame size within the transmit FIFO is larger than the threshold. In addition, full frames with a length less than the threshold are also transmitted. The transmit process must be in the stopped state to change these bits. Controls the selected threshold level for the AX88140A transmit FIFO. Four threshold levels are allowed. REG6<18>=0 REG6<18>=1 REG6<18>=1 REG6<21> REG6<15:14> REG6<22>=X REG6<22>=1 REG6<22>=0 15:14 R/W 0 00 72 72 128 0 01 96 96 256 0 10 128 128 512 0 11 160 160 1024 1 XX Store & Forward Store & Forward Store & Forward 1 Start Transmission 13 R/W ST - Start/Stop Transmission 0 Stop Transmission 1 Enable force collision 12 R/W FC - Force Collision Mode 0 Disable force collision 00 Normal 01 Internal Loop-back 11:10 R/W OM - Operating Mode 10 External Loop-back 9 R/W FD - Full-Duplex Mode 1 Full-Duplex |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |