| 数据搜索系统,热门电子元器件搜索 |
|
LP8556 数据表(PDF) 18 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
LP8556 数据表(HTML) 18 Page - Texas Instruments |
|
18 / 63 page ![]() 25% 100% Max current is set with CURRENT and CURRENT_MAX EPROM bits or CURRENT and CURRENT_MAX EPROM bits and RISET resistor 25% 50% 100% PURE CURRENT CONTROL (PWM_TO_I_THRESHOLD = 0000b) BRIGHTNESS 50% 25% 50% 100% PWM CONTROL (PWM_TO_I_THRESHOLD = 1111b) BRIGHTNESS Max current is set with CURRENT and CURRENT_MAX EPROM bits or CURRENT and CURRENT_MAX EPROM bits and RISET resistor 100% 18 LP8556 SNVS871I – JULY 2012 – REVISED MARCH 2016 www.ti.com Product Folder Links: LP8556 Submit Documentation Feedback Copyright © 2012–2016, Texas Instruments Incorporated 8.3.2.5 Output Dimming Schemes The LP8556 device supports three types of output dimming control methods: PWM Control, Pure Current Control and Adaptive Dimming (Hybrid PWM and Current) Control. 8.3.2.5.1 PWM Control PWM control is the traditional way of controlling the brightness using PWM of the outputs with the same LED current across the entire brightness range. Brightness control is achieved by varying the duty cycle proportional to the input PWM. PWM frequency is set either using an external set fesistor (RFSET) or using the PWM_FREQ EPROM field. The maximum LED current is set by using an external set Resistor (RISET), CURRENT, and CURRENT_MAX EPROM bits. PWM frequency can also be set by simply using the CURRENT and CURRENT_MAX EPROM bits. NOTE The output PWM signal is de-coupled and generated independent of the input PWM signal eliminating display flicker issues and allowing better noise immunity. Figure 8. PWM Only Output Dimming Scheme 8.3.2.5.2 Pure Current Control In Pure Current Control mode, brightness control is achieved by changing the LED current proportionately from maximum value to a minimum value across the entire brightness range. Like in PWM Control mode, the maximum LED current is set by using an external set Resistor (RISET), CURRENT, and CURRENT_MAX EPROM bits. The maximum LED current can also be set by just using the CURRENT and CURRENT_MAX EPROM bits. Current resolution in this mode is 12 bits. Figure 9. Pure Current or Analog Output Dimming Scheme |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |