ISD-300LP™ Low-Power USB 2.0 to ATA/ATAPI Bridge IC
CY7C68310
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose
, CA 95134
•
408-943-2600
Document 38-08030 Rev. *H
Revised June 28, 2004
1.0
Features
• Fixed-function mass storage device–requires no firmware
code
• USB Mass Storage Class Bulk-Only specification-compliant
(version 1.0)
• USB 2.0-certified (TID# 40001426)
•
Integrated USB transceiver
•
High-speed (480-Mbit) and full-speed (12-Mbit) support
•
USB Suspend/Resume, Remote Wakeup support
• Two power modes of operation–self-powered and USB bus-
powered
•
Low power consumption allows for bus-powered opera-
tion
•
VBUS-powered CF support
•
True USB portable HDD support
• Compact 80-pin TQFP package with a Lead-Free option
• ATA/ATAPI-6 specification-compliant–provides support for
mass storage devices larger than 137GB
• 5V tolerant inputs, 3.3V output drive
• Flexible USB descriptor and configuration retrieval sources
•
I2C-compatible serial ROM interface
•
ATA interface using vendor-specific ATA command (FBh)
implemented on ATAPI or ATA device
•
Default on-chip ROM contents for manufacturing/devel-
opment
• 2-Kbyte SRAM data buffer for ATA/ATAPI data transfers
• ATA interface supports ATA PIO modes 0–4, UDMA modes
0–4 (multiword DMA not supported). ATA interface
operation mode is automatically selected during device
initialization or manually programmed with I2C-compatible
configuration data
• Automatic detection of either Master or Slave ATA/ATAPI
devices
• Mode Page 5 Support–increased support for formatting
removable media devices
• ATA Interrupt support for ATAPI devices–offers more robust
ATA support across OS platforms
• System event notification via Vendor-specific ATA
command
•
Input pin for media cartridge detection or ejection request
•
USB bus state indications (Reset, FS/HS mode of oper-
ation, Suspend/Resume, Bus/Self-powered)
• Three General Purpose I/O (GPIO) pins
• Multiple LUNs supported within a single ATAPI device
• ATA translation provides seamless ATA support with
standard MSC drivers
• Additional ATA command support provided by vendor-
specific ATACBs (ATA command blocks utilizing the MSC
Command Block Wrapper)
• Provisions to share ATA bus with other hosts (e.g.
USB/1394 dual device)
• Manufacturing interconnect test support provided with
vendor-specific USB commands:
•
Read/Write access to relevant ASIC pins
•
Manufacturing Interconnect Test Tools
• Utilizes inexpensive 30-Mhz crystal for clock source.
1.1
Functional Block Diagram
CY7C68310
Control Logic
ATA Interface Logic
ROM
64 Byte
RAM
2kByte FIFO
USB HS/FS
Control Logic
EEPROM
Interface
Control
USB
2.0
Xcvr
GPIO Pins (3)
nEJECT
ATAEN
OSC
nRESET
SYSIRQ
DISKRDY
nPWR500
LOWPWR
DRVPWRVLD
VBUSPWRD
VBUSPWRVLD
SCL
SDA
VBUS
D-
D+
Figure 1-1. Block Diagram
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
