 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ADA4350ARUZ-R7 数据表(PDF) 12 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADA4350ARUZ-R7 数据表(HTML) 12 Page - Analog Devices |
|
|
12 / 38 page  Data Sheet ADA4350 Rev. B | Page 11 of 37 5 V ADC DRIVER TA = 25°C, +VS = 5 V, −VS = 0 V, unless otherwise specified. See Figure 1 for the P1 and M1 amplifiers, RL = 1 kΩ when differential, and RL = 500 Ω when single-ended. Table 8. Parameter Test Conditions/Comments1 Min Typ Max Unit DYNAMIC PERFORMANCE −3 dB Bandwidth When used differentially, VOUT = 0.1 V p-p 33 MHz When used differentially, VOUT = 2.0 V p-p 16 MHz When P1 is used, VOUT = 50 mV p-p 47 MHz When P1 is used, VOUT = 1.0 V p-p 16 MHz When M1 is used, VOUT = 50 mV p-p 37 MHz When M1 is used, VOUT = 1.0 V p-p 18 MHz Overdrive Recovery Time For P1, positive recovery/negative recovery 200/200 ns For M1, positive recovery/negative recovery 140/120 ns Slew Rate When differentially used, VOUT = 2 V step 37 V/µs When P1 or M1 is single-ended, VOUT = 1 V step 20 V/µs Settling Time 0.1% When used differentially, VOUT = 2 V step 75 ns When P1 is used, VOUT = 1 V step 60 ns When M1 is used, VOUT = 1 V step 60 ns NOISE/DISTORTION PERFORMANCE Harmonic Distortion (HD2/HD3) When used differentially, fC = 100 kHz, VOUT = 1 V p-p −117/−116 dBc When used differentially, fC = 1 MHz, VOUT = 1 V p-p −80/−85 dBc When P1 is used, fC = 100 kHz, VOUT = 500 mV p-p −108/−115 dBc When P1 is used, fC = 1 MHz, VOUT = 500 mV p-p −80/−83 dBc When M1 is used, fC = 100 kHz, VOUT = 500 mV p-p −103/−107 dBc When M1 is used, fC = 1 MHz, VOUT = 500 mV p-p −75/−78 dBc Referred to Input (RTI) Voltage Noise For P1, f = 10 Hz 60 nV/√Hz For P1, f = 100 kHz 5.2 nV/√Hz Referred to Output (RTO) Voltage Noise For P1and M1, f = 10 Hz, measured at VOUT2 140 nV/√Hz For P1 and M1, f = 100 kHz, measured at VOUT2 18 nV/√Hz Input Current Noise f = 100 kHz, referred to P1 1.1 pA/√Hz DC PERFORMANCE Output Offset Voltage Differential 0.15 0.75 mV Input Offset Voltage Drift Differential 0.6 16 µV/°C Output Offset Voltage Single-ended, P1 only 60 275 µV Single-ended, M1 only 70 250 µV Input Offset Voltage Drift Single-ended, P1 only 0.1 5.9 µV/°C Single-ended, M1 only 0.3 4.5 µV/°C Input Bias Current P1 only at VIN1 pin 60 230 nA P1 only at RF1 pin 60 350 nA M1 only at REF pin 60 200 nA Input Offset Current P1 only 60 270 nA Open-Loop Gain P1 only, VOUT = 1.5 V to 3.5 V 94 100 dB Gain M1 only 1.99 1.9995 2.01 V/V Gain Error −0.5 +0.5 % Gain Error Drift 0.6 3.4 ppm/°C |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
