CS3.241

C-Line

This bracket is used to mount the power supply onto a flat surface

without utilizing a DIN-Rail.

This bracket is used to mount DIMENSION units sideways with or without utilizing a DIN-Rail. The two aluminum

brackets and the black plastic slider of the unit must be detached so that the steel brackets can be installed.

For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on

the steel bracket.

Side mounting with DIN-rail brackets

Side mounting without DIN-rail brackets

Jul. 2015 / Rev. 2.0 DS-CS3.241-EN

All parameters are specified at 24V, 3.3A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

19/24