QS10.DNET

Q-Series

Output protection

Output over-voltage protection

typ. 27Vdc

max. 29.5Vdc

In case of an internal power supply defect, a redundant

circuit limits the maximum output voltage. The output

shuts down and automatically attempts to restart.

Degree of protection

IP 20

EN/IEC 60529

Penetration protection

> 3.5mm

e.g. screws, small parts

Over-temperature protection

yes

Output shut-down with automatic restart

Input transient protection

MOV (Metal Oxide Varistor)

Internal input fuse

T6.3A H.B.C.

not user replaceable

*)

In case of a protection event, audible noise may occur.

SELV

IEC/EN 60950-1

PELV

IEC/EN 60204-1, EN 50178, IEC 62103, IEC 60364-4-41

double or reinforced insulation

Class of protection

I

PE (Protective Earth) connection required

Isolation resistance

> 5MOhm

input to output, 500Vdc

PE resistance

< 0.1Ohm

Touch current (leakage current)

typ. 0.19mA / 0.44mA

100Vac, 50Hz, TN-,TT-mains / IT-mains

typ. 0.29mA / 0.65mA

120Vac, 60Hz, TN-,TT-mains / IT-mains

typ. 0.53mA / 1.04mA

230Vac, 50Hz, TN-,TT-mains / IT-mains

< 0.25mA / 0.54mA

110Vac, 50Hz, TN-,TT-mains / IT-mains

< 0.38mA / 0.79mA

132Vac, 60Hz, TN-,TT-mains / IT-mains

< 0.74mA /1.29mA

264Vac, 50Hz, TN-,TT-mains / IT-mains

*)

double or reinforced insulation

Dec. 2014 / Rev. 2.2 DS-QS10.DNET-EN

All parameters are specified at 24V, 8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

14/22