STM8T141 datasheet(29/50 Pages) STMICROELECTRONICS

29 / 50 page

STM8T141

Electrical characteristics

Doc ID 15699 Rev 7

29/50

Electrical characteristics

9.1

Parameter conditions

Unless otherwise specified, all voltages are in reference to VSS.

9.1.1

Minimum and maximum values

Unless otherwise specified, the minimum and maximum values are guaranteed in the worst

conditions of ambient temperature and supply voltage by tests in production on 100% of the

devices with an ambient temperature at TA = 25 °C and TA = TAmax (given by the selected

temperature range).

Data based on characterization results, design simulation and/or technology characteristics

are indicated in the table footnotes and are not tested in production. Based on

characterization, the minimum and maximum values refer to sample tests and represent the

mean value plus or minus three times the standard deviation (mean ±3

).

9.1.2

Typical values

Unless otherwise specified, typical data are based on TA = 25 °C, and VDD = 5 V. They are

given only as design guidelines and are not tested.

9.1.3

Typical curves

Unless otherwise specified, all typical curves are given only as design guidelines and are

not tested.

9.1.4

Loading capacitor

The loading conditions used for pin parameter measurement are shown in Figure 21.

Figure 21.

Pin loading conditions

Output pin

50 pF

STM8T141 数据表(PDF) 29 Page - STMicroelectronics