AMS002-R datasheet(19/29 Pages) SILABS

19 / 29 page

AMS-00x • Embedded Bluetooth Low Energy Solution

Regulatory Certification, Section 7

ADS-MS00x-107R • Preliminary Data Sheet

Page | 15

September 14, 2015

Additional information on labeling and user information

requirements for Part 15 devices can be found in KDB

Publication 784748 available at the FCC Office of Engi-

neering and Technology (OET) Laboratory Division

Knowledge Database (KDB) at the following website:

https://apps.fcc.gov/oetcf/kdb/index.cfm

RF Exposure

All transmitters regulated by FCC must comply with RF

exposure requirements. OET Bulletin 65, Evaluating

Compliance with FCC Guidelines for Human Exposure to

Radio Frequency Electromagnetic Fields, provides assis-

tance in determining whether proposed or existing

transmitting facilities, operations or devices comply

with limits for human exposure to Radio Frequency (RF)

fields adopted by the Federal Communications Com-

mission (FCC). The bulletin offers guidelines and sugges-

tions for evaluating compliance.

If appropriate, compliance with exposure guidelines for

mobile and unlicensed devices can be accomplished by

the use of warning labels and by providing users with

information concerning minimum separation distances

from transmitting structures and proper installation of

antennas.

The following statement must be included as a CAU-

TION statement in manuals and OEM products to alert

users of FCC RF exposure compliance:

If the AMS-00x module is used in a portable application

(i.e., the antenna is less than 20 cm from persons dur-

ing operation), the integrator is responsible for per-

forming Specific Absorption Rate (SAR) testing in ac-

cordance with FCC rules 2.1091.

External Antenna

Modular approval in the United States is permitted with

the use of the integrated antenna ONLY. If an external

antenna is used with the AMS-00x module, additional

testing of the end product is needed to meet FCC re-

quirements.

Further Information

Additional information regarding FCC certification and

use of the AMS-00x module in the United States is

available from the following sources.

 Federal Communications Commission (FCC)

http://www.fcc.gov.au

 FCC Office of Engineering and Technology (OET)

Laboratory Division Knowledge Database (KDB)

http://apps.fcc.gov/oetcf/kdb/index.cfm

7.2 Canada

The AMS-00x module has been certified for use in Can-

ada under Industry Canada (IC) Radio Standards Specifi-

cation (RSS) RSS-210 and RSSGen. Modular approval

permits the installation of a module in a host device

without the need to recertify the device.

Labeling and User Information

Requirements

Labeling Requirements for the Host Device (from Sec-

tion 3.2.1, RSS-Gen, Issue 3, December 2010): The host

device shall be properly labeled to identify the module

within the host device.

The Industry Canada certification label of a module

shall be clearly visible at all times when installed in the

host device, otherwise the host device must be labeled

to display the Industry Canada certification number of

the module, preceded by the words “Contains transmit-

ter module”, or the word “Contains”, or similar wording

expressing the same meaning, as follows:

User Manual Notice for License-Exempt Radio Appa-

ratus (from Section 7.1.3 RSS-Gen, Issue 3, December

2010): User manuals for license-exempt radio appa-

To satisfy FCC RF Exposure requirements for mobile

and base station transmission devices, a separation

distance of 20 cm or more should be maintained

between the antenna of this device and persons

during operation. To ensure compliance, operation

at closer than this distance is not recommended.

The antenna(s) used for this transmitter must not

be co-located or operating in conjunction with any

other antenna or transmitter

Contains transmitter module IC: 11685A-0D06E

AMS002-R 数据表(PDF) 19 Page - Silicon Laboratories

AMS002-R 数据表(HTML) 19 Page - Silicon Laboratories

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

数据表下载