CP20.241-R1, CP20.241-R2,

CP20.241-R3

CP-Series

June 2017 / Rev. 0.1 DS-CP20.241-R2-EN

All parameters are typical values specified at 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

9/30

P R E L I M I N A R Y

This feature monitors the output voltage of the power supply in front of the decoupling device (see also chapter 12).

Contact closes

As soon as the output voltage reaches typ. 22Vdc.

Contact opens

As soon as the output voltage dips below 22Vdc.

Short dips will be extended to a signal length of 100ms. Dips shorter than 1ms will be ignored.

Contact ratings

Maximal 60Vdc 0.3A, 30Vdc 1A, 30Vac 0.5A, resistive load

Minimal permissible load 1mA at 5Vdc

Isolation voltage

See dielectric strength table in chapter 20.

Fig. 8-1 DC-ok relay contact behavior

100ms

22Vdc

<

1ms

open

open

closed

closed

>

1ms