| 数据搜索系统,热门电子元器件搜索 |
|
ST6262C 数据表(PDF) 23 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST6262C 数据表(HTML) 23 Page - STMicroelectronics |
|
23 / 78 page ![]() 23/78 ST62T52C ST62T62C/E62C RESETS (Cont’d) 3.2.3 Watchdog Reset The MCU provides a Watchdog timer function in order to ensure graceful recovery from software upsets. If the Watchdog register is not refreshed before an end-of-count condition is reached, the internal reset will be activated. This, amongst oth- er things, resets the watchdog counter. The MCU restarts just as though the Reset had been generated by the RESET pin, including the built-in stabilisation delay period. 3.2.4 LVD Reset The on-chip Low Voltage Detector, selectable as user option, features static Reset when supply voltage is below a reference value. Thanks to this feature, external reset circuit can be removed while keeping the application safety. This SAFE RESET is effective as well in Power-on phase as in power supply drop with different reference val- ues, allowing hysteresis effect. Reference value in case of voltage drop has been set lower than the reference value for power-on in order to avoid any parasitic Reset when MCU start's running and sinking current on the supply. As long as the supply voltage is below the refer- ence value, there is a internal and static RESET command. The MCU can start only when the sup- ply voltage rises over the reference value. There- fore, only two operating mode exist for the MCU: RESET active below the voltage reference, and running mode over the voltage reference as shown on the Figure 14., that represents a power- up, power-down sequence. Note: When the RESET state is controlled by one of the internal RESET sources (Low Voltage De- tector, Watchdog, Power on Reset), the RESET pin is tied to low logic level. Figure 14. LVD Reset on Power-on and Power-down (Brown-out) 3.2.5 Application Notes No external resistor is required between VDD and the Reset pin, thanks to the built-in pull-up device. Direct external connection of the pin RESET to VDD must be avoided in order to ensure safe be- haviour of the internal reset sources (AND.Wired structure). RESET RESET VR02106A time VUp Vdn VDD |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |