AD4022BCPZ-R2 datasheet(1/39 Pages) AD

部件名	AD4022BCPZ-R2

功能描述	20-Bit, 1.8 MSPS/1 MSPS/500 kSPS, Easy Drive, Differential SAR ADCs

PDF	39 Pages

Scroll/Zoom	100%

制造商	AD [Analog Devices]

网页	http://www.analog.com

标志

1 / 39 page

20-Bit, 1.8 MSPS/1 MSPS/500 kSPS,

Easy Drive, Differential SAR ADCs

Data Sheet

AD4020/AD4021/AD4022

Rev. B

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Technical Support

www.analog.com

FEATURES

Easy Drive

Greatly reduced input kickback

Input current reduced to 0.5 μA/MSPS

Enhanced acquisition phase, ≥77% of cycle time at 1 MSPS

First conversion accurate, no latency or pipeline delay

Input span compression for single-supply operation

Fast conversion allows low SPI clock rates

Input overvoltage clamp protection sinks up to 50 mA

SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface

High performance

Differential analog input range: ±VREF, VREF from 2.4 V to 5.1 V

Throughput: 1.8 MSPS/1 MSPS/500 kSPS options

INL: ±3.1 ppm maximum

Guaranteed 20-bit no missing codes

SNR: 100.5 dB at fIN = 1 kHz at VREF 5 V

THD: −123 dB at fIN = 1 kHz, −100 dB at fIN = 100 kHz

SINAD: 89 dB at fIN = 900 kHz (see Figure 17)

Oversampled dynamic range

104 dB for OSR = 2

131 dB for OSR = 1024

Low power

Single 1.8 V supply operation with 1.71 V to 5.5 V logic interface

2.7 mW at 500 kSPS (VDD only)

83 μW at 10 kSPS, 15 mW at 1.8 MSPS (total power)

10-lead packages: 3 mm × 3 mm LFCSP, 3 mm × 4.90 mm MSOP

Pin compatible with AD4003/AD4007/AD4011 family

Guaranteed operation: −40°C to +125°C

APPLICATIONS

Automatic test equipment

Machine automation

Medical equipment

Battery-powered equipment

Precision data acquisition systems

Instrumentation and control systems

FUNCTIONAL BLOCK DIAGRAM

GND

IN+

IN–

SDI

SCK

SDO

CNV

AD4020/AD4021/AD4022

20-BIT

SAR ADC

SERIAL

INTERFACE

VIO

REF

VDD

VREF

0

VREF

0

VREF/2

HIGH-Z

MODE

CLAMP

SPAN

COMPRESSION

TURBO

MODE

STATUS

BITS

2.5V TO 5V

1.8V

10µF

1.8V TO 5V

3-WIRE OR

4-WIRE SPI

INTERFACE

(DAISY

CHAIN, CS)

Figure 1.

GENERAL DESCRIPTION

The AD4020/AD4021/AD4022 are high accuracy, high speed,

low power, 20-bit, Easy Drive, precision successive approximation

register (SAR) analog-to-digital converters (ADCs) that operate

from a single power supply, VDD. The reference voltage, VREF,

is applied externally and can be set independent of the supply

voltage. The AD4020/AD4021/AD4022 power scales linearly

with throughput.

Easy Drive features reduce both signal chain complexity and power

consumption while enabling higher channel density. The reduced

input current, particularly in high-Z mode, coupled with a long

signal acquisition phase, eliminates the need for a dedicated

ADC driver. Easy Drive broadens the range of companion circuitry

that is capable of driving these ADCs (see Figure 2).

Input span compression eliminates the need to provide a

negative supply to the ADC driver amplifier while preserving

access to the full ADC code range. The input overvoltage clamp

protects the ADC inputs against overvoltage events, minimizing

disturbances on the reference pin, and eliminating the need for

external protection diodes.

Fast device throughput up to 1.8 MSPS allows users to

accurately capture high frequency signals and to implement

oversampling techniques to alleviate the challenges associated

with antialias filter designs. Decreased serial peripheral interface

(SPI) clock rate requirements reduce digital input/output power

consumption, broadens digital host options, and simplifies the

task of sending data across digital isolation. The SPI-compatible

serial user interface is compatible with 1.8 V, 2.5 V, 3 V, and 5 V

logic by using the separate VIO logic supply.

18

–15

–9

–3

6

12

15

–12

–6

0

3

9

–5

–3

–1

5

3

1

INPUT DIFFERENTIAL VOLTAGE (V)

25°C HIGH-Z ENABLED, 1.8MSPS

25°C HIGH-Z DISABLED, 1.8MSPS

Figure 2. Input Current vs. Input Differential Voltage

类似零件编号 - AD4022BCPZ-R2

制造商	部件名	数据表	功能描述
Analog Devices	AD4020	789Kb / 37P	Precision SAR, Differential ADC Rev. A
	AD4020	2Mb / 28P	1nV/?숰z 420MHz GBW, 180V/關s, Low Distortion Rail-to-Rail Output Op Amps
	AD4020	3Mb / 34P	36V Fully-Differential Programmable-Gain Instrumentation Amplifier with 25pA Input Bias Current
	AD4020	2Mb / 30P	0.88nV/√Hz 730MHz, 500V/μs, Low Distortion Rail-to-Rail Output Op Amps with Shutdown Rev. B
	AD4020	3Mb / 42P	Precision, Low Power Differential Amplifier/ADC Driver Family Rev. C

More results

类似说明 - AD4022BCPZ-R2

制造商	部件名	数据表	功能描述
Analog Devices	AD7915	561Kb / 26P	16-Bit, 1 MSPS/500 kSPS Differential PulSAR ADCs REV. 0
	AD4680	427Kb / 29P	Differential Inputs, 1 MSPS/500 kSPS, Dual Simultaneous Sampling SAR ADCs 10/2020-Revision 0
	AD4682	656Kb / 30P	Pseudo Differential Input, 1 MSPS/500 kSPS, Dual, Simultaneous Sampling, 16-Bit, SAR ADCs 10/2020-Revision 0
	AD4695	1Mb / 96P	16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADCs 12/2020-Revision 0
Microchip Technology	MCP33131D	3Mb / 59P	1 Msps/500 kSPS 16/14/12-Bit Differential Input SAR ADC 08/15/18
Microchip Technology	MCP33151D-XX	3Mb / 66P	1 Msps/500 kSPS, 14/12-Bit Differential Input SAR ADC 05/14/19
Analog Devices	AD4697	5Mb / 107P	16-Bit, 8-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Rev. 0
	AD4030-24	2Mb / 50P	24-Bit, 2 MSPS/500 kSPS, SAR ADCs Rev. A
	AD4630-16	1Mb / 51P	16-Bit, 2 MSPS/500 kSPS, Dual Channel SAR ADCs Rev. A
	AD4630-24	2Mb / 52P	24-Bit, 2 MSPS/500 kSPS, Dual Channel SAR ADCs Rev. A