| 数据搜索系统,热门电子元器件搜索 |
|
FXLS8967AF 数据表(PDF) 65 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
FXLS8967AF 数据表(HTML) 65 Page - NXP Semiconductors |
|
65 / 98 page ![]() NXP Semiconductors FXLS8967AF 3-Axis Low-g Accelerometer Field Description 6 ORIENT_ENABLE Orientation detection function enable 0 (default): Orientation detection function is disabled. 1: Orientation detection function is enabled. Table 85. ORIENT_CONFIG register (address 29h) bit description...continued 15.28 ORIENT_DBCOUNT register (address 2Ah) The ORIENT_DBCOUNT register sets the debounce count used for validating an orientation state change. The selected ODR in LPM and HPM modes, and the effective ODR when operating in FPM determine the debounce counter period. Calculate the minimum debounce latency time by ODR–1 * ORIENT_DBCOUNT[7:0]. For example, with an ODR of 100 Hz and debounce count value of 10, the new orientation must be maintained for 100 ms before it is recognized as a valid orientation and ORIENT_STATUS[NEW_ORIENT] is asserted. A transition from Standby to Active, a transition from Active to Standby, or a change in the auto-WAKE/SLEEP mode resets the internal orientation debounce counter. Bit 7 6 5 4 3 2 1 0 Name ORIENT_DBCOUNT[7:0] Reset 0 0 0 0 0 0 0 0 Access R/W R/W R/W R/W R/W R/W R/W R/W Table 86. ORIENT_DBCOUNT register (address 2Ah) bit allocation Field Description 7 to 0 ORIENT_ DBCOUNT[7:0] 8-bit unsigned orientation debounce counter value A new orientation must be maintained for the minimum number of ODR periods specified in order for the orientation to be considered valid before asserting the ORIENT_ STATUS[NEW_ORIENT] event flag. ORIENT_CONFIG[ORIENT_DBCNTM] controls the counter behavior. The selected ODR in LPM and HPM modes and the effective ODR when operating in FPM determines the debounce counter period. Calculate the minimum debounce latency time by: Debounce_time = (ODR–1 * ORIENT_DBCOUNT) Note: If the applied acceleration is greater than 1.25 g on any axis, the debounce counter is held at the current value (frozen). Table 87. ORIENT_DBCOUNT register (address 2Ah) bit description 15.29 ORIENT_BF_ZCOMP register (address 2Bh) Orientation back/front and Z-tilt angle compensation register Bit 7 6 5 4 3 2 1 0 Name ORIENT_BKFR[1:0] — ORIENT_ZLOCK[2:0] Reset 0 1 0 0 0 1 0 0 Access R/W R/W R/W R/W R/W R/W R/W R/W Table 88. ORIENT_BF_ZCOMP register (address 2Bh) bit allocation FXLS8967AF All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved. Objective data sheet Rev. 1 — 27 April 2021 65 / 98 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |