| 数据搜索系统,热门电子元器件搜索 |
|
ST25R3911B 数据表(PDF) 41 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25R3911B 数据表(HTML) 41 Page - STMicroelectronics |
|
41 / 116 page ![]() Figure 23. Flowchart for ISO14443A anticollision with ST25R3911B Cascade level n (n =1) 1) Fill FIFO with SELn + NVB (0x20) 2) Set registers: Number of transmitted bytes register 1 = 0x00 Number of transmitted bytes register 2 = 0x10 1) Send command Transmit without CRC 2) Expected interrupts: I_txe I_col (if collision occurs) I_rxs I_rxe SELn=0x93 for n=1 for 4 bytes UID SELn=0x95 for n=2 for 7 bytes UID SELn=0x97 for n=3 for 10 bytes UID Read FIFO for the valid data from the selected PICC I_col occured? Set - no_CRC_rx = 1 - antcl = 1 1) Read Collision Display Register to identify the bit position where the collision occurred 2) Read FIFO for the response from PICC 1) Fill FIFO with part 1 of bit anticollision frame: SELn + NVB (available from valid tag response) + received valid data +1 or 0 for the bit where the collision occurred 2) Set registers: mention the number of received full bytes and split bits + 1 in: Number of transmitted bytes register 1 Number of full bytes Number of transmitted bytes register 2 Set - no_CRC_rx = 0 - antcl = 0 1) Send command Transmit with CRC 2) Expected nterrupts: I_txe I_rxe Send SELECT: fill FIFO with SELn + NVB(0x70) + UID CLn UID complete? End anticollision with RATS Enter Cascade level n+1 Yes Yes No No FIFO is filled in with PICC response FIFO is filled in with PICC response FIFO is filled in with SAK PICC sends complete UID 1.2.18 FeliCa™ reader mode The general recommendation from Section 1.2.17 Reader operation is valid for FeliCa™ reader mode as well. Both 212 and 424 kb/s bit rates are supported, they are same in both directions (reader to tag and tag to reader). Modulation reader to tag is AM. In FeliCa™ mode the FeliCa™ frame format (see Table 14) is supported. Table 14. FeliCa™ frame format Preamble Sync Length Payload CRC 48 data bits, all logical 0 2 bytes (B2h, 4Dh) Length byte (value= payload length + 1), the length range is from 2 to 255 Payload 2 bytes ST25R3911B Application information DS11793 - Rev 6 page 41/116 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |