A22NE-P

22

Characteristics

*1. State when an LED is not added between terminals of the same polarity on a lighting unit. Does not apply to lighted-type 100 to 200 V lighting units.

*2. With no icing or condensation.

*3. Capable of operation at up to 80°C under IP@9K testing conditions per JIS D 5020.

*4. The degree of protection from the front of the panel.

*5. The degree of protection is IP65 even with an integrated control box, but the system is not oil resistant.

Operating Characteristics

* Rotation torque value.

Terminal Arrangement (BOTTOM VIEW)

Operation

Turn-reset

Pull-reset

Non-lighted model

Lighted Model

Non-lighted model

Item

A22NE-

@-P@@@-N

A22NE-M-P

@@@-@

A22NE-MP-P

@@@-N

A22NE-MP-P

@@@-N-69K

Allowableoperating

frequency

Mechanical

30

operations/minute or less (One operation consists of set and reset operations.)

Electrical

30

operations/minute or less (One operation consists of set and reset operations.)

100 M

Ω min. (at 500 VDC)

Contact resistance

100 m

Ω max. (initial value)

Dielectric

strength

Between terminals

of same polarity*1

2,500 VAC, 50/60 Hz 1 minute (initial value)

Between each

terminal and

ground

2,500 VAC, 50/60 Hz 1 minute (initial value)

Vibration

resistance

Malfunction

10 to 55 Hz, 1.5 mm double amplitude (contact separation within 1 ms)

Shock

resistance

Malfunction

Durability

Mechanical

300,000 operations min. (One operation consists of set and reset

operations.)

100,000 operations min.

(One operation consists of

set and reset operations.)

Electrical

300,000 operations min. (One operation consists of set and reset

operations.)

100,000 operations min.

(One operation consists of

set and reset operations.)

-20 to +70°C

-20 to +55°C

-20 to +70°C

Ambient operating humidity

35 to 85% RH

-40 to +70°C

IP69K

Electric shock protection class

Class II

PTI (tracking characteristic)

175

Degree of contamination

3 (EN 60947-5-1)

Minimum direct opening stroke

11 mm

Minimum direct opening force

45 N

Conditional short-circuit current

100 A (EN 60947-5-1)

Wight (for a 40-dia. head

1NC/1NO Operation Unit)

Approx. 55g

Approx. 60g

Approx. 85 g

Approx. 115 g

Item

Turn-reset

Pull-reset

Lighted / non-lighted models

Non-lighted model

Non-lighted model (Models with IP69K)

Total travel force (TTF)

45 N max.

60 N max.

70 N max.

Return force (RF)

0.25N·m

* max.

60 N max.

70 N max.

Total travel (TT)

10 ±1 mm

5.5 ±1 mm

5.5 ±1 mm

Non-lighted (two contacts)

Non-lighted (three contacts)

Lighted (two contacts)

Terminal

(insertion) hole

Lock lever

(17.6°)

(20°)

10

20

31.9

4

Switch Blocks

Lock lever

Terminal

(insertion) hole

(17.6°)

(20°)

10

20

31.9

4

Switch Blocks

Lock lever

Lighting unit

Terminal

(insertion) hole

(17.6°)

(20°)

10

20

31.9

4

Switch Blocks