| 数据搜索系统,热门电子元器件搜索 |
|
A22Z-R 数据表(PDF) 30 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
A22Z-R 数据表(HTML) 30 Page - Omron Electronics LLC |
|
30 / 52 page ![]() A22NE-P 30 Connecting Stranded Wires Use the following procedure to connect the wires to the terminal block. 1. Hold a flat-blade screwdriver at an angle and insert it into the release hole. The angle should be approximately 6 °. If the flat-blade screwdriver is inserted correctly, you will feel the spring in the release hole. 2. With the flat-blade screwdriver still inserted into the release hole, insert the wire into the terminal hole until the end strikes the terminal block. 3. Remove the flat-blade screwdriver from the release hole. Checking Connections • After the insertion, pull gently on the wire to make sure that it will not come off and it is securely fastened to the terminal block. • If you use a ferrule with a conductor length of 10 mm, part of the conductor may be visible after the ferrule is inserted into the terminal block, but the product insulation distance will still be satisfied. 2. Removing Wires from the Push-In Plus Terminal Block Use the following procedure to remove wires from the terminal block. The same method is used to remove stranded wires, solid wires, and ferrules. 1. Hold a flat-blade screwdriver at an angle and insert it into the release hole. The angle should be approximately 6 °. 2. With the flat-blade screwdriver still inserted into the release hole, remove the wire from the terminal insertion hole. 3. Remove the flat-blade screwdriver from the release hole. 3. Recommended Ferrules and Crimp Tools Coating peeling amount Recommended ferrules Note: 1. Make sure that the outer diameter of the wire coating is smaller than the inner diameter of the insulation sleeve of the recommended ferrule. 2. Make sure that the ferrule processing dimensions conform to the following figures. Recommended Flat-Blade Screwdrivers Use a flat-blade screwdriver to connect and remove wires. Use one of the following flat-blade screwdrivers. The following table shows manufacturers and models as of 2015/Dec. * The SZF 0-0,4 × 2,5 (manufactured by Phoenix Contact) can be procured through an OMRON exclusive purchase form (XW4Z-00B). • After wiring the Switch/Indicator, provide a sufficient insulation distance. Approx. 6˚ (2) Approx. 6˚ (1) (3) Flat-blade screwdriver Approx. 6˚ The wiring and screwdriver angles for the Lighting Unit and Switch Block (2 contacts) are the same as for the Switch Block (1 contact) shown in the above illustration. Approx. 6˚ (2) Approx. 6˚ (1) (3) Flat-blade screwdriver Approx. 6˚ The wiring and screwdriver angles for the Lighting Unit and Switch Block (2 contacts) are the same as for the Switch Block (1 contact) shown in the above illustration. Recommend Wire Type Stripping length (Ferrules not used) 0.25 to 1.5 mm2/AWG 24 to AWG 16 8 mm Applicable wire Ferrule conductor length (mm) Stripping length (mm) (Ferrules not used) Recommended ferrules (mm2) (AWG) Phoenix Contact product Weidmuller product Wago product 0.25 24 8 10 AI 0, 25-8 H0.25/12 216-301 10 12 AI 0, 25-10 --- --- 0.34 22 8 10 AI 0, 34-8 H0.34/12 216-302 10 12 AI 0, 34-10 --- --- 0.5 20 8 10 AI 0, 5-8 H0.5/14 216-201 10 12 AI 0, 5-10 H0.5/16 216-241 0.75 18 8 10 AI 0, 75-8 H0.75/14 216-202 10 12 AI 0, 75-10 H0.75/16 216-242 1/1.25 18/17 8 10 AI 1-8 H1.0/14 216-203 10 12 AI 1-10 H1.0/16 216-243 1.25/1.5 17/16 8 10 AI 1, 5-8 H1.5/14 216-204 10 12 AI 1, 5-10 H1.5/16 216-244 Recommended Crimp Tools CRIMPFOX6 CRIMPFOX6T-F CRIMPFOX10S PZ6 roto Variocri mp4 Model Manufacture ESD 0,40 × 2,5 Wera SZS 0,4 × 2,5 SZF 0-0,4 × 2,5 * Phoenix Contact 0.4 × 2.5 × 75 302 Wiha AEF.2,5 × 75 Facom 210-719 Wago SDI 0,4 × 2,5 × 75 Weidmuller 8 to 10 mm Max. 1.9 mm Max. 2.6 mm Side view 0.4 mm 2.5 mm dia. 2.5 mm Front view |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |