H7CC-R11 datasheet(15/66 Pages) OMRON

15 / 66 page

Counter

H7CC-A

Operating Procedures

Setting Procedure Guide

Setting for Counter Operation *

Use the following settings.

Setting for Tachometer Operation *

Refer to page 31.

* At the time of delivery, the H7CC is set to the 1-stage preset counter configuration or 2-stage preset counter configuration. Refer to page 39 for

information on switching models.

I/O Functions for Counter Operation

1cnt

func

* Table Default Modes and Selectable Functions

Model

Default mode

H7CC-AW

H7CC-AU

2-stage preset

counter

1-stage preset

counter

1-stage preset

counter

Any mode

Other models

1-stage preset or

total preset counter only

Selectable mode

Step1

UP1+UP6 or DW1+DW6

(Press and hold for 2 s)

Note: The modes that can be selected depend on the model. (Refer to the Table.)

UP1+UP6 or DW1+DW6

(Press and hold for 2 s)

twn

Run mode

Power ON

Configuration

selection mode

(1-stage

preset

counter)

(2-stage

preset

counter)

(Total and

preset counter)

(Batch

counter)

(Dual

counter)

(Twin

counter)

(Tachometer)

Select the function from Table using the UP1 Key (DW1 Key) .

The H7CC-A

@ is a Counter that contains more

than one functional counter.

When using the Counter in any mode other than

the default mode

*, use the following chart to enter

Configuration Selection Mode and set the functions

that are suitable to the application.

*6. k-2, d, l and h are displayed only when the H7AN compatibility

function is

off or the input mode is ud-a, ud-b, or ud-c.

(Not displayed when the function is set to

twn.)

H is displayed only for 2-stage models.

Note: Displayed only when Twin Counter Mode is not selected.

*5 Displayed for output modes other than K-2, D, L, and H only.

Usage as a Decrementing

Counter (

5ub)

The

5ub parameter is

normally not displayed. You

must set the

outm parameter

shown below in advance to

(

k-2, d, l, or h) to display it.

*3 When Using Dual Counter

Operation

Function

setting mode

* Use UP1+UP3 to move up and

DW1+DW3 to move down

Step2

Parameters are set with the operation keys on the front panel.

The characters displayed in reverse video are the default settings.

In the function setting mode, the status indicator of the keys that can be set lights up.

(Example) In the case of the prescale value (PSCL)

A value from 0.001 to 99.999 can be set, and therefore, the status indicator

of the UP1 Key to UP5 Key (DW1 Key to DW5 Key) lights up.

(DOWN)

(UP/DOWN A)

(UP/DOWN B)

(UP/DOWN C)

(UP/DOWN D)

(UP/DOWN E)

(UP/DOWN F)

(UP)

(99.999)

(1.000)

(0.001)

Change to Function Setting Mode.

• Set the input mode using the UP1 Key (DW1 Key).

Input mode

(CNTM)

Output mode

(OUTM)

(N)

(F)

(C)

(R)

(K-1)

(P)

(Q)

(A)

(K-2)

(D)

(L)

(H)

(Addition) (Subtraction)

*4 Displayed only when the output

mode is K-2, D, L, or H.

Dual count

calculating

mode

(ADD)

• Set the dual count calculating

mode using the UP1 (DW1) Keys.

Prescale

value

(PSCL)

From

cntm

outm

1000

pscl

add

calm

down

k-1

k-2

pqa

dlh

ud-a

ud-b

ud-c

ud-d

ud-e

ud-f

0.001

99.999

1.000

sub

add

• Set the output mode using the UP1 Key (DW1 Key).

*1 If the mode is switched to the function setting mode during operation, operation will continue.

*2 Changes made to settings in function setting mode are enabled for the first time when the mode is changed to run mode.

Also, when settings are changed, the counter is reset (present value initialized and output turned OFF) on returning to run mode.

UP1+UP3 or DW1+DW3

(Press and hold for 2 s)

UP1+UP3 or DW1+DW3

(Press and hold for 2 s)

Run mode

Power ON

For details on operations and display in run mode, refer to page 21.

The display depends on the selected configuration.

H7CC-R11 数据表(PDF) 15 Page - Omron Electronics LLC

H7CC-R11 数据表(HTML) 15 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表下载

链接网址

H7CC-R11 数据表(PDF) 15 Page - Omron Electronics LLC

H7CC-R11 数据表(HTML) 15 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表 下载

链接网址

数据表下载