| 数据搜索系统,热门电子元器件搜索 |
|
H7CC-R11 数据表(PDF) 46 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
H7CC-R11 数据表(HTML) 46 Page - Omron Electronics LLC |
|
46 / 66 page ![]() H7CC-R @ 46 Nomenclature 1 9 2 3 6 7 8 4 5 10 11 ON (Enable) (Factory setting) OFF (Disable) 10 mm 6 mm 7. Up Keys (UP1 to UP6) 11. Status indicator 9. Hold Operation (UP6+DW6) 8. Down Keys (DW1 to DW6) <When Run mode is not selected.> · When the indicator display mode is ON If "Upper and lower limit" or "Area" is selected in the tachometer output mode, the ratio of the measurement value to the comparison value is displayed from 0 to 100%. · When the indicator display mode is all off or all lit All off or all lit display. Note. When you press the Up Key or the Down Key, the indicator display or all-lit display goes off, and the pressed key lights up or blinks. <When Function Setting Mode is not selected> · The keys that can be set light up for notification. (UP1, 2, 3, 4, 5, 6 from right to left) (DW1, 2, 3, 4, 5, 6 from right to left) (The hold operation is enabled by pressing and holding the keys for 1 second or longer. When the keys are pressed simultaneously, all status indicators start blinking. The hold operation is disabled if the keys are released within 1 second.) To perform the hold operation, firmly press and hold both UP6 and DW6. If you press only UP6 or DW6, the set value will change. 10. Mode Operation (UP1+UP3 or DW1+DW3) (Changes modes and setting items. Press and hold the keys for 2 seconds or longer to move to the function setting mode. When the keys are pressed simultaneously, the status indicators on UP1 (DW1) and UP3 (DW3) start blinking. The mode operation is disabled if the keys are released within 2 seconds.) Operation Keys 12. Key-protect Switch Switches 1. Hold Indicator (yellow) 2. Key Protect Indicator (yellow) 3. Control Output Indicator (yellow) 4. Comparison Value 1, 2 Stage Indicator (1-output models) (2-output models) Lit when the key protect switch is ON. (Lit when hold operation is performed. ) 5. Present Value (Main Display) Character height: 10 mm (white) 6. Comparison Value (Sub-display) Character height: 6 mm (green) Display Section Character Size for Sub-display Character Size for Main Display OUT OUT 1 2 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |