AD7453BRT-R2 datasheet(5/20 Pages) AD

5 / 20 page

REV. 0

–5–

AD7453

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

AD7453 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended

to avoid performance degradation or loss of functionality.

ABSOLUTE MAXIMUM RATINGS

(TA = 25

∞C, unless otherwise noted.)

VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V

VIN+ to GND . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD + 0.3 V

VIN– to GND . . . . . . . . . . . . . . . . . . .

–0.3 V to VDD + 0.3 V

Digital Input Voltage to GND . . . . . . . . . . . . . –0.3 V to +7 V

Digital Output Voltage to GND . . . . . . –0.3 V to VDD + 0.3 V

VREF to GND . . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD + 0.3 V

Input Current to Any Pin Except Supplies

2 . . . . . . . . .

±10 mA

Operating Temperature Range

Commercial (A, B Version) . . . . . . . . . . . . . –40

∞C to +85∞C

Storage Temperature Range . . . . . . . . . . . . . –65

∞C to +150∞C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 150

∞C

JA Thermal Impedance . . . . . . . . . . . . . 211.5

∞C/W (SOT-23)

JC Thermal Impedance . . . . . . . . . . . . . 91.99

∞C/W (SOT-23)

Lead Temperature, Soldering

Vapor Phase (60 secs) . . . . . . . . . . . . . . . . . . . . . . . . 215

∞C

Infrared (15 secs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

∞C

ESD

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 kV

NOTES

1Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those listed in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

2Transient currents of up to 100 mA will not cause SCR latch-up.

OUTPUT

25pF

IOH

200 A

IOL

1.6mA

1.6V

Figure 2. Load Circuit for Digital Output Timing

Specifications

ORDERING GUIDE

Temperature

Linearity

Package

Model

Range

Error (LSB)

Description

Option

Branding

AD7453ART-REEL7

–40

∞C to +85∞C

±1.5

8-Lead SOT-23

RT-8

C0C

AD7453BRT-R2

–40

∞C to +85∞C

±1

8-Lead SOT-23

RT-8

C09

AD7453BRT-REEL7

–40

∞C to +85∞C

±1

8-Lead SOT-23

RT-8

C09

EVAL-AD7453CB

Evaluation Board

EVAL-CONTROL BRD2

Controller Board

NOTES

1Linearity error here refers to integral nonlinearity error.

2This can be used as a standalone evaluation board or in conjunction with the evaluation board controller for evaluation/demonstration purposes.

3The evaluation board controller is a complete unit allowing a PC to control and communicate with all Analog Devices evaluation boards ending in the CB designa-

tors. To order a complete Evaluation Kit, you will need to order the ADC evaluation board, i.e., EVAL-AD7453CB, the EVAL-CONTROL BRD2, and a 12 V ac

transformer. See the AD7453 application note for more information.

AD7453BRT-R2 数据表(PDF) 5 Page - Analog Devices

AD7453BRT-R2 数据表(HTML) 5 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

数据表下载

链接网址

AD7453BRT-R2 数据表(PDF) 5 Page - Analog Devices

AD7453BRT-R2 数据表(HTML) 5 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

数据表 下载

链接网址

数据表下载