| 数据搜索系统,热门电子元器件搜索 |
|
KSZ9563RNXI 数据表(PDF) 16 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
KSZ9563RNXI 数据表(HTML) 16 Page - Microchip Technology |
|
16 / 226 page ![]() KSZ9563R DS00002419D-page 16 2017-2018 Microchip Technology Inc. 3.2.1 CONFIGURATION STRAPS The KSZ9563R utilizes configuration strap pins to configure the device for different modes. These strap pins are con- figured by using external pull-up/down resistors to create a high or low state on the pins which are sampled at the end of a device power-up or software reset cycle. They are also latched when powering-up from a hardware or software power-down or hardware reset state (rising edge of RESET_N). The configuration strap pins and their associated func- tions are detailed in Table 3-3. +1.2V Digital Power DVDDL P +1.2V Digital Power Ground GND GND Ground (pins and pad) TABLE 3-3: CONFIGURATION STRAP DESCRIPTIONS Configuration Strap Pin Description LED1_0 Switch Enable at Startup 0: Start Switch is disabled. The switch will not forward packets until the Start Switch bit is set in the Switch Operation Register. 1: Start Switch is enabled. The switch will forward packets immediately after reset. (Default) LED1_1 In-Band Management (IBA) 0: Enable In-Band Management 1: Disable In-Band Management (Default) LED2_0 Port 3 (MAC) MII/RMII Mode 0: MII: PHY Mode RMII: Clock Mode. RMII 50MHz reference clock is output on REFCLKO. RGMII: IBS is disabled 1: MII: MAC Mode (Default) RMII: Normal Mode. RMII 50MHz reference clock is input on REFCLKI. RGMII: IBS is enabled LED2_1 Port 3 (MAC) Speed Select 0: 1000Mbps Mode 1: 100Mbps Mode (Default) RXD3, RXD2 [RXD3, RXD2]: Port 3 (MAC) xMII Mode 00: MII (Default) 01: RMII 10: RESERVED 11: RGMII RXD1, RXD0 [RXD1, RXD0]: Serial Interface Mode 00: MIIM (Default) 01: I2C 1x: SPI RX_ER, PME_N [RX_ER, PME_N]: Ports 1 and 2 (PHY) Configuration 00: RESERVED 01: Auto-negotiation enable with EEE (Default) 10: Auto-negotiation disabled (Force 100Mbps, full-duplex mode), and Auto-MDIX disable (set to MDI-X mode) 11: Auto-negotiation disabled (Force 100Mbps, full-duplex mode), and Auto-MDIX disable (set to MDI mode) TABLE 3-2: PIN DESCRIPTIONS (CONTINUED) Name Symbol Buffer Type Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |