 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ADL5385ACPZ-R2 数据表(PDF) 5 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADL5385ACPZ-R2 数据表(HTML) 5 Page - Analog Devices |
|
|
5 / 24 page  ADL5385 Rev. 0 | Page 5 of 24 Parameter Conditions Min Typ Max Unit @ +85°C after optimization at +25°C −43 dBc @ −40°C after optimization at +25°C −47 dBc Second Baseband Harmonic (FLO − (2 × FBB)), POUT = 3 dBm −58 dBc Third Baseband Harmonic (FLO + (3 × FBB)), POUT = 3 dBm −47 dBc Output IP2 F1 = +3.5 MHz, F2 = +4.5 MHz, POUT = −3 dBm per tone 57 dBm Output IP3 F1 = +3.5 MHz, F2 = +4.5 MHz, POUT = −3 dBm per tone 22 dBm Quadrature Phase Error 2.6 degrees I/Q Amplitude Balance 0.003 dB Noise Floor 20 MHz offset from LO, all BB inputs at a bias of 500 mV −160 dBm/Hz 20 MHz offset from LO, output power = −5 dBm −156 dBm/Hz Output Return Loss −20 dB OUTPUT FREQUENCY = 2150 MHz Output Power Single (lower) sideband output 2.6 dBm Output P1 dB 8 dBm Carrier Feedthrough Unadjusted (nominal drive level) −36 dBm @ +85°C after optimization at +25°C −47 dBm @ −40°C after optimization at +25°C −48 dBm Sideband Suppression Unadjusted (nominal drive level) −37 dBc Second Baseband Harmonic (FLO − (2 × FBB)), POUT = 2.6 dBm −56 dBc Third Baseband Harmonic (FLO + (3 × FBB)), POUT = 2.6 dBm −45 dBc Output IP2 F1 = +3.5 MHz, F2 = +4.5 MHz, POUT = −3 dBm per tone 54 dBm Output IP3 F1 = +3.5 MHz, F2 = +4.5 MHz, POUT = −3 dBm per tone 21 dBm Quadrature Phase Error 1.5 degrees I/Q Amplitude Balance < 0.05 dB Noise Floor 20 MHz offset from LO, all BB inputs at a bias of 500 mV −160 dBm/Hz 20 MHz offset from LO, output power = −5 dBm −156 dBm/Hz Output Return Loss −15 dB LO INPUTS Pin LOIP and Pin LOIN LO Drive Level Characterization performed at typical level −10 –7 +5 dBm Input Impedance 50 Ω Input Return Loss 350 MHz, LOIN ac-coupled to ground −20 dB BASEBAND INPUTS Pin IBBP, Pin IBBN, Pin QBBP, Pin QBBN I and Q Input Bias Level 500 mV Input Bias Current −70 μA Bandwidth (0.1 dB) RF = 500 MHz, output power = 0 dBm 80 MHz Bandwidth (3 dB) RF = 500 MHz, output power = 0 dBm >500 MHz ENABLE INPUT ENBL Turn-On Settling Time ENBL = high (for output to within 0.5 dB of final value) 1.0 μs Turn-Off Settling Time ENBL = low (at supply current falling below 20 mA) 1.4 μs ENBL High Level (Logic 1) 1.5 V ENBL Low Level (Logic 0) 0.4 V TEMPERATURE OUTPUT TEMP Output Voltage TA = 27.15 °C, 300K, R L = 1 M Ω (after full warmup) 1.56 V Temperature Slope −40 °C ≤ T A ≤ +85°C, R L = 1 M Ω 4.6 mV/ °C Output Impedance 1.0 kΩ POWER SUPPLIES Pin VPS1 and Pin VPS2 Voltage 4.75 5.5 V Supply Current ENBL = high 215 240 mA ENBL = low 80 μA |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
