GWIXP425BDT datasheet(30/134 Pages) INTEL

30 / 134 page

Intel® IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor

March 2005

Datasheet

Document Number: 252479, Revision: 005

The I-cache can be enabled or disabled. Attribute bits within the descriptors — contained in the

ITLB of the IMMU — provide some control over an enabled I-cache.

When a needed line (eight 32-bit words) is not present in the I-cache, the line is fetched (critical

word first) from memory via a two-level, deep-fetch queue. The fetch queue allows the next

instruction to be accessed from the I-cache, but only when its data operands do not depend on the

execution results of the instruction being fetched via the queue.

2.2.6

Data Cache (D-Cache)

The D-cache can contain high-use data such as lookup tables and filter coefficients, allowing the

core access to data at core frequencies. This prevents core stalls caused by multi-cycle accesses to

external memory.

The 32-Kbyte D-cache is 32-set/32-way associative, where each set contains 32 ways and each

way contains a tag address, a cache line (32 bytes with one parity bit per byte) of data, two dirty

bits (one for each of two eight-byte groupings in a line), and one valid bit. For each of the 32 sets,

zero through 28 ways can be locked, unlocked, or used as local SRAM. Unlocked ways are

replaceable via a round-robin policy.

The D-cache (together with the mini-data cache) can be enabled or disabled. Attribute bits within

the descriptors, contained in the DTLB of the DMMU, provide significant control over an enabled

D-cache. These bits specify cache operating modes such as read and write allocate, write-back,

write-through, and D-cache versus mini-data cache targeting.

The D-cache (and mini-data cache) work with the load buffer and pend buffer to provide “hit-

under-miss” capability that allows the core to access other data in the cache after a “miss” is

encountered. The D-cache (and mini-data cache) works in conjunction with the write buffer for

data that is to be stored to memory.

2.2.7

Mini-Data Cache

The mini-data cache can contain frequently changing data streams such as MPEG video, allowing

the core access to data streams at core frequencies. This prevents core stalls caused by multi-cycle

accesses to external memory. The mini-data cache relieves the D-cache of data “thrashing” caused

by frequently changing data streams.

The 2-Kbyte, mini-data cache is 32-set/two-way associative, where each set contains two ways and

each way contains a tag address, a cache line (32 bytes with one parity bit per byte) of data, two

dirty bits (one for each of two eight-byte groupings in a line), and a valid bit. The mini-data cache

uses a round-robin replacement policy, and cannot be locked.

The mini-data cache (together with the D-cache) can be enabled or disabled. Attribute bits

contained within a coprocessor register specify operating modes write and/or read allocate, write-

back, and write-through.

The mini-data cache (and D-cache) work with the load buffer and pend buffer to provide “hit-

under-miss” capability that allows the core to access other data in the cache after a “miss” is

encountered. The mini-data cache (and D-cache) works in conjunction with the write buffer for

data that is to be stored to memory.

GWIXP425BDT 数据表(PDF) 30 Page - Intel Corporation

GWIXP425BDT 数据表(HTML) 30 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载