TSL2569CS datasheet(48/56 Pages) OSRAM

48 / 56 page

ams Datasheet

Page 47

[v1-00] 2016-Apr-12

Document Feedback

TSL2568, TSL2569 − Manufacturing Information

The CS and T packages have been tested and have

demonstrated an ability to be reflow soldered to a PCB

substrate. The process, equipment, and materials used in these

test are detailed below.

The solder reflow profile describes the expected maximum heat

exposure of components during the solder reflow process of

product on a PCB. Temperature is measured on top of

component. The components should be limited to a maximum

of three passes through this solder reflow profile.

Figure 45:

TSL2568/69 Solder Reflow Profile

Figure 46:

TSL2568/TSL2569 Solder Reflow Profile Graph

Note(s):

1. Not to scale - for reference only.

Parameter

Reference

TSL2568/69

Average temperature gradient in preheating

2.5°C/s

Soak time

tsoak

2 to 3 minutes

Time above 217°C

Max 60 s

Time above 230°C

Max 50 s

Time above Tpeak -10°C

Max 10 s

Peak temperature in reflow

Tpeak

260° C (-0°C/+5°C)

Temperature gradient in cooling

Max -5°C/s

Manufacturing Information

tsoak

Tpeak

Not to scale — for reference o

Time (s)

TSL2569CS 数据表(PDF) 48 Page - OSRAM GmbH

TSL2569CS 数据表(HTML) 48 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表下载