UG-866

EV-RADAR-MMIC2 User Guide

Rev. B | Page 28 of 28

Qty

Reference Designator

Description

Manufacturer

Part Number

1

U2

ADF4159, 13 GHz fractional-N

PLL

Analog Devices

ADF4159CCPZ

1

U3

32 kΩ, I2C serial EEPROM

Microchip

24LC32A-I/MS

1

U4

3.0 V linear regulator

Analog Devices

ADP150AUJZ-3.0

1

U5

1.8 V linear regulator

Analog Devices

ADP150AUJZ-1.8

2

U6, U7

Ultralow noise, linear regulators,

3.3 V

Analog Devices

ADP7104ARDZ-3.3

1

Y1

Oscillator, 100 MHz

Connor-Winfield

CWX113-100.0M

Table 3. EV-ADAR-D2S Board

Reference Designator

Description

Manufacturer

Part Number

C19, C20, C25, C26, C31, C32, C37, C38,

C43, C44, C49, C50, C55, C56, C61, C62

10 pF capacitors

AVX

04025A100DAT2A

O1, O2, O3, O4, O5, O6, O7, O8, VNEG,

VPOS

SMA connectors

Emerson

142-0701-851

U1 to U8

270 MHz differential amplifiers

Analog Devices

AD8130ARZ

C18 , C21, C24, C27 ,C30, C33, C36, C39,

C42, C45, C48, C51, C54, C57, C60, C63

100 pF capacitors

Murata

GRM1555C1H101JD01D

C1 to C17, C22, C23, C28, C29, C34, C35,

C40, C41, C46, C47, C52, C53, C58, C59,

C64 to C72

1 nF capacitor

Murata

GRM188R61E105KA12D

R2 to R4, R6, R8 to R10, R12, R14 to R16,

R18, R20 to R22, R24

0 Ω link resistors

Multicomp

MC 0.063W 0603 0R

J1

80-pin socket connector

Samtec

QSE-040-01-F-D-A

RELATED LINKS

Resource

Description

ADF5901

24 GHz VCO and PGA with 2-channel PA Output

ADF5904

4-Channel, 24 GHz, Receiver Downconverter

ADF4159

Direct Modulation/Fast Waveform Generating, 13 GHz, Fractional-N Frequency Synthesizer

ADP7104

20 V, 500 mA, Low Noise, CMOS LDO

I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors).

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

LegalTerms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the“Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you

have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.

(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,

temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term

“Third Party”includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may

not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to

promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any

occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.

Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive.TERMINATION. ADI may terminate this Agreement at any time upon giving written notice

to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO

WARRANTIES OR REPRESENTATIONS OF ANY KINDWITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED

TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL

PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF

THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITEDTO THE

AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable

United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of

Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby

submits to the personal jurisdiction and venue of such courts.The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

©2015–2017 Analog Devices, Inc. All rights reserved. Trademarks and

registered trademarks are the property of their respective owners.

UG13410-0-4/17(B)