Data Sheet

ADRF5010

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

analog.com

Rev. 0 | 7 of 12

Figure 3. Pin Configuration (Top View)

Table 6. Pin Function Descriptions

Pin No.

Mnemonic

Description

1, 3, 4, 8, 9, 11,12, 13, 14

GND

Ground. These pins must be connected to the RF/DC ground of the PCB.

2

RF1

RF Port 1. No DC blocking capacitor is necessary when the RF line potential is equal to 0 V DC. For the interface

schematic, see Figure 4.

5

VDD

Positive Supply Voltage. For the interface schematic, see Figure 6.

6

CTRL

Control Input Voltage. For the interface schematic, see Figure 5.

7

VSS

Negative Supply Voltage. For the interface schematic, see Figure 7.

10

RF2

RF Port 2. No DC blocking capacitor is necessary when the RF line potential is equal to 0 V DC. For the interface

schematic, see Figure 4.

EPAD

Exposed Pad. The exposed pad must be connected to the RF/DC ground of the PCB.

INTERFACE SCHEMATICS

Figure 4. RF1, RF2 Pins Interface Schematic

Figure 5. CTL Pin Interface Schematic

Figure 6. VDD Interface Schematic

Figure 7. VSS Interface Schematic