CC2564MODACMOG datasheet(43/68 Pages) TI2

43 / 68 page

CC2564MODN, CC2564MODA

www.ti.com

SWRS160E – FEBRUARY 2014 – REVISED JANUARY 2017

Submit Documentation Feedback

Product Folder Links: CC2564MODN CC2564MODA

Device and Documentation Support

NOTE

Information in this section is not part of the TI component specification, and TI does not

warrant its accuracy or completeness. TI’s customers are responsible for determining

suitability of components for their purposes. Customers should validate and test their design

implementation to confirm system functionality.

TI offers an extensive line of development tools. Tools and software to evaluate the performance of the

device, generate code, and develop solutions are listed below.

7.1

Device Certification and Qualification

The TI CC2564MODx module is certified for the FCC, IC, and ETSI/CE. Moreover, the module is a

Bluetooth Qualified Design by the Bluetooth Special Interest Group (Bluetooth SIG). TI Customers that

build products based on the TI CC2564MODx module can save in testing cost and time per product

family.

For more information, see the CC256x Regulatory Compliance wiki and the CC256x Bluetooth SIG

Certification wiki.

7.1.1

FCC Certification

The TI CC2564MODx module is certified for the FCC as a single-modular transmitter. The module is a

FCC-certified radio module that carries a modular grant. The module complies with the intentional radiator

portion (Part 15c) of the FCC certification: Part 15.247 transmitter tests. For more information, see

CC2564MODx Modular Grant, FCC ID: Z64-2564N. A Class 2 Permissive Change is applied to

CC2564MODA.

7.1.2

IC Certification

The TI CC2564MODx module is certified for the IC as a single-modular transmitter. The TI CC2564MODx

module meets IC modular approval and labeling requirements. The IC follows the same testing and rules

as the FCC regarding certified modules in authorized equipment. For more information, see

CC2564MODx Modular Grant, IC ID: 451I-2564N. A Class 2 Permissive Change is applied to

CC2564MODA.

7.1.3

ETSI/CE Certification

The TI CC2564MODx module is CE certified with certifications to the appropriate EU radio and EMC

directives summarized in the Declaration of Conformity and evidenced by the CE mark. The module is

tested against the ETSI EN300-328 v1.8.1 radio tests, which is accepted by a number of countries for

radio compliance. For more information, see CC2564MODN DoC and CC2564MODA DoC.

7.1.4

Bluetooth Special Interest Group Qualification

The TI CC2564MODx module is Bluetooth qualified and carries a Bluetooth 4.1 Controller Subsystem

Qualification Design ID (QDID), which covers the lower layers of a Bluetooth design up to the HCI layer. TI

customers that build products based on the TI CC2564MODx module can reference this QDID in their

Bluetooth product Listing. For more information, see CC2564MODN Controller Subsystem, QDID 55257

and CC2564MODA Controller Subsystem, QDID 64631.

7.2

Tools and Software

Design Kits and Evaluation Modules

Dual-Mode Bluetooth® CC2564 Evaluation Board The CC256XQFNEM evaluation board contains the

CC2564B device and is intended for evaluation and design purposes for the CC256x

devices.

CC2564MODACMOG 数据表(PDF) 43 Page - Texas Instruments

CC2564MODACMOG 数据表(HTML) 43 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

数据表下载