9/14

M14C64, M14C32

the data byte output, and the memory continues to

output the next byte in sequence. To terminate the

stream of bytes, the master must

the last byte output, and

condition. The output data comes from consecu-

tive addresses, with the internal address counter

automatically incremented after each byte output.

After the last memory address, the address

counter will ‘roll-over’ and the memory will contin-

ue to output data from the start of the memory

block.

Acknowledge in Read Mode

In all read modes the memory waits for an ac-

does not pull the SDA line low during this time, the

memory terminates the data transfer and switches

to its standby state.