ST7LITE3XF2 datasheet(22/173 Pages) STMICROELECTRONICS

22 / 173 page

ST7LITE3xF2

22/173

MCU Reset, or after a Reset Stack Pointer instruc-

tion (RSP), the Stack Pointer contains its reset val-

ue (the SP6 to SP0 bits are set) which is the stack

higher address.

The least significant byte of the Stack Pointer

(called S) can be directly accessed by a LD in-

struction.

Note: When the lower limit is exceeded, the Stack

Pointer wraps around to the stack upper limit, with-

out indicating the stack overflow. The previously

stored information is then overwritten and there-

fore lost. The stack also wraps in case of an under-

flow.

The stack is used to save the return address dur-

ing a subroutine call and the CPU context during

an interrupt. The user may also directly manipulate

the stack by means of the PUSH and POP instruc-

tions. In the case of an interrupt, the PCL is stored

at the first location pointed to by the SP. Then the

other registers are stored in the next locations as

shown in Figure 11.

– When an interrupt is received, the SP is decre-

mented and the context is pushed on the stack.

– On return from interrupt, the SP is incremented

and the context is popped from the stack.

A subroutine call occupies two locations and an in-

terrupt five locations in the stack area.

Figure 11. Stack Manipulation Example

PCH

PCL

PCH

PCL

PCH

PCL

PCH

PCL

PCH

PCL

CALL

Subroutine

Interrupt

Event

PUSH Y

POP Y

IRET

RET

or RSP

@ 01FFh

@ 0180h

Stack Higher Address = 01FFh

Stack Lower Address = 0180h

ST7LITE3XF2 数据表(PDF) 22 Page - STMicroelectronics

ST7LITE3XF2 数据表(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载