| 数据搜索系统,热门电子元器件搜索 |
|
ST63156 数据表(PDF) 32 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST63156 数据表(HTML) 32 Page - STMicroelectronics |
|
32 / 86 page ![]() TIMERS (Continued) Timer Operating Modes As the external TIMER pin is not available on ST631xx devices, the only allowed operating mode is the output mode that have to be selected by set- ting to 1 bit 4 and by clearing to 0 bit 5 in the TSCR1 register. This procedure will enable both Timer 1 and Timer 2. Output Mode (TSCR1 D4 = 1, TSCR1 D5 = 0). On this mode the timer prescaler is clocked by the prescaler clock input (OSC/12). The user can se- lect the desired prescaler division ratio through the PS2/PS1/PS0 bits. When TCR count reaches 0, it sets the TMZ bit in the TSCR. The TMZ bit can be tested under program control to perform timer functions whenever it goes high. Bit D4 and D5 on TSCR2 (Timer 2) register are not implemented. Timer Interrupt When the counter register decrements to zero and the software controlled ETI (enable timer interrupt) bit is set to one then an interrupt request associ- ated to interrupt vector #3 (for Timer 1) and to inter- rupt vector #4 (for Timer 2) is generated. When the counter decrements to zero also the TMZ bit in the TSCR register is set to one. Figure 29. Timer Working Principle Notes : TMZ is set when the counter reaches 00h ; how- ever, it may be set by writing 00h in the TCR regis- ter or setting the bit 7 of the TSCR register. TMZ bit must be cleared by user software when servic- ing the timer interrupt to avoid undesired interrupts when leaving the interrupt service routine. After re- set, the 8-bit counter register is loaded to FFh while the 7-bit prescaler is loaded to 7Fh , and the TSCR register is cleared which means that timer is stopped (PSI=0) and timer interrupt disabled. A write to the TCR register will predominate over the 8-bit counter decrement to 00h function, i.e. if a write and a TCR register decrement to 00h occur simultaneously, the write will take precedence, and the TMZ bit is not set until the 8-bit counter reaches 00h again. The values of the TCR and the PSC registers can be read accurately at any time. ® ST63140,142,126,156 28/82 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |