| 数据搜索系统,热门电子元器件搜索 |
|
T80C5112-RKSCL 数据表(PDF) 25 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
T80C5112-RKSCL 数据表(HTML) 25 Page - ATMEL Corporation |
|
25 / 97 page ![]() Rev. B - November 10, 2000 25 Preliminary T80C5112 Figure 7. Push-Pull Output 9.1.4. Input only Configuration The input only configuration is a pure input with neither pull-up nor pull-down. The input only configuration is shown in Figure 7. Figure 8. Input only 9.2. Ports description 9.2.1. Ports P1, P3 and P4 Every output on the T80C5112 may potentially be used as a 20 mA sink LED drive output. However, there is a maximum total output current for all ports which must not be exceeded. All ports pins of the T80C5112 have slew rate controlled outputs. This is to limit noise generated by quickly switching output signals. The slew rate is factory set to approximately 10 ns rise and fall times. The inputs of each I/O port of the T80C5112 are TTL level Schmitt triggers with hysteresis. 9.2.2. Ports P0 and P2 High pin count version of the T80C5112 have standard address and data ports P0 and P2. These ports are standard C51 ports (Quasi-bidirectional I/O). The control lines are provided on the pins : ALE, PSEN, EA, Reset; RD and WR signals are on the bits P1.1 and P1.0 . Input Pin Strong N P Port latch Data Data Input Pin Data |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |