4584 datasheet(64/157 Pages) RENESAS

64 / 157 page

Rev.3.00

2004.08.06

page 64 of 155

REJ03B0010-0300Z

4584 Group

PRELIMINARY

Notice: This is not a final specification.

Some parametric limits are subject to change.

Fig. 52 Switch to ceramic resonance/RC oscillation/quartz-crystal oscillation

Reset

On-chip oscillator operation

CMCK instruction

CRCKinstruction

• Main clock: ceramic resonance

• On-chip oscillator: operating

• System clock: on-chip oscillator clock

CYCK instruction

• Set the main clock (f(XIN)) oscillation by bit 1 of register MR.

• Switch the system clock by bit 0 of register MR.

Also, when system clock is switched after main clock oscillation is started,

generate the oscillation stabilizing wait time by program if necessary.

• Set the on-chip oscillator clock oscillation by register RG.

• Main clock: RC oscillation circuit

• On-chip oscillator: operating

• System clock: on-chip oscillator clock

• Main clock: Quartz-crystal circuit

• On-chip oscillator: operating

• System clock: on-chip oscillator clock

(1) Main clock generating circuit (f(XIN))

The ceramic resonator, RC oscillation or quartz-crystal oscillator

can be used for the main clock of this MCU.

After system is released from reset, the MCU starts operation by

the clock output from the on-chip oscillator which is the internal os-

cillator.

When the ceramic resonator is used, execute the CMCK instruc-

tion. When the RC oscillation is used, execute the CRCK

instruction. When the quartz-crystal oscillator is used, execute the

CYCK instruction. The oscillation start/stop of main clock f(XIN) is

controlled by bit 1 of register MR. The system clock is selected by

bit 0 of register MR. The oscillation circuit by the CMCK, CRCK or

CYCK instruction can be selected only at once. The oscillation cir-

cuit corresponding to the first executed one of these instructions is

valid.

Execute the CMCK, CRCK or CYCK instruction in the initial setting

routine of program (executing it in address 0 in page 0 is recom-

mended). Also, when the CMCK, CRCK or CYCK instruction is not

executed in program, this MCU operates by the on-chip oscillator..

4584 数据表(PDF) 64 Page - Renesas Technology Corp

4584 数据表(HTML) 64 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

4584 数据表(PDF) 64 Page - Renesas Technology Corp

4584 数据表(HTML) 64 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载