H8SLASH300H datasheet(7/552 Pages) RENESAS

7 / 552 page

Rev. 3.00 May 15, 2007 Page vii of xxxii

Notes:

When using an on-chip emulator (E7) for H8/38602R program development and debugging, the

following restrictions must be noted.

1. The

NMI pin is reserved for the E7, and cannot be used.

2. Area H'4000 to H'4FFF should not be accessed.

3. Area H'F780 to H'FB7F should not be accessed.

4. When the E7 is used,

NMI is an input/output pin (open-drain in output mode).

5. When on-board programming/erasing is performed in boot mode, the SCI3 (P31/RXD3 and

P32/TXD3) is used.

6. When the on-chip emulator is used, even though the on-chip oscillator is selected, connect a

resonator to OSC1 and OSC2 or input an external clock to OSC1.

7. When using the E7, set the FROMCKSTP bit in clock halt register 1 to 1.

Related Manuals:

The latest versions of all related manuals are available from our web site.

Please ensure you have the latest versions of all documents you require.

http://www.renesas.com/

H8/38602R Group manuals:

Document Title

Document No.

H8/38602R Group Hardware Manual

This manual

H8/300H Series Software Manual

REJ09B0213

User's manuals for development tools:

Document Title

Document No.

H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor

User's Manual

REJ10B0058

Microcomputer Development Environment System H8S, H8/300 Series

Simulator/Debugger User's Manual

ADE-702-282

H8S, H8/300 Series High-performance Embedded Workshop 3 Tutorial

REJ10B0024

H8S, H8/300 Series High-performance Embedded Workshop 3 User's Manual REJ10B0026

H8/300H 数据表(PDF) 7 Page - Renesas Technology Corp

H8/300H 数据表(HTML) 7 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载