| 数据搜索系统,热门电子元器件搜索 |
|
MPC8313ECVRGDDA 数据表(PDF) 12 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8313ECVRGDDA 数据表(HTML) 12 Page - Freescale Semiconductor, Inc |
|
12 / 100 page ![]() MPC8313E PowerQUICC™ II Pro Processor Hardware Specifications, Rev. 2.1 12 Freescale Semiconductor Clock Input Timing 4 Clock Input Timing This section provides the clock input DC and AC electrical characteristics for the MPC8313E. 4.1 DC Electrical Characteristics Table 7 provides the system clock input (SYS_CLK_IN/PCI_SYNC_IN) DC timing specifications for the MPC8313E. 4.2 AC Electrical Characteristics The primary clock source for the MPC8313E can be one of two inputs, SYS_CLK_IN or PCI_CLK, depending on whether the device is configured in PCI host or PCI agent mode. Table 8 provides the system clock input (SYS_CLK_IN/PCI_CLK) AC timing specifications for the MPC8313E. Table 7. SYS_CLK_IN DC Electrical Characteristics Parameter Condition Symbol Min Max Unit Input high voltage — VIH 2.4 NVDD +0.3 V Input low voltage — VIL –0.3 0.4 V SYS_CLK_IN input current 0 V ≤ VIN ≤ NVDD IIN —±10 μA PCI_SYNC_IN input current 0 V ≤ VIN ≤ 0.5 V or NVDD –0.5 V ≤ VIN ≤ NVDD IIN —±10 μA PCI_SYNC_IN input current 0.5 V ≤ VIN ≤ NVDD –0.5 V IIN — ±50 μA Table 8. SYS_CLK_IN AC Timing Specifications Parameter/Condition Symbol Min Typ Max Unit Notes SYS_CLK_IN/PCI_CLK frequency fSYS_CLK_IN 24 — 66.67 MHz 1 SYS_CLK_IN/PCI_CLK cycle time tSYS_CLK_IN 15 — — ns — SYS_CLK_IN/PCI_CLK rise and fall time tKH, tKL 0.6 0.8 1.2 ns 2 SYS_CLK_IN/PCI_CLK duty cycle tKHK/tSYS_CLK_IN 40 — 60 % 3 SYS_CLK_IN/PCI_CLK jitter — — — ±150 ps 4, 5 Notes: 1. Caution: The system, core, security block must not exceed their respective maximum or minimum operating frequencies. 2. Rise and fall times for SYS_CLK_IN/PCI_CLK are measured at 0.4 and 2.7 V. 3. Timing is guaranteed by design and characterization. 4. This represents the total input jitter—short term and long term—and is guaranteed by design. 5. The SYS_CLK_IN/PCI_CLK driver’s closed loop jitter bandwidth should be <500 kHz at –20 dB. The bandwidth must be set low to allow cascade-connected PLL-based devices to track SYS_CLK_IN drivers with the specified jitter. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |