| 数据搜索系统,热门电子元器件搜索 |
|
WM9708 数据表(PDF) 20 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM9708 数据表(HTML) 20 Page - Wolfson Microelectronics plc |
|
20 / 28 page ![]() WM9708 Advanced Information WOLFSON MICROELECTRONICS LTD AI Rev 2.0 April 2001 20 MUTE MX4...MX0 FUNCTION 0 0 0000 0dB attenuation 0 0 0001 1.5dB attenuation 0 1 1111 46.5dB attenuation 1 x xxxx ∞dB attenuation Table 4 Volume Register Function MASTER TONE CONTROL REGISTERS (INDEX 08h) Optional register for support of tone controls (bass and treble). The WM9708 does not support bass and treble and writing to this register will have no effect, reading will result in all zeros. PC BEEP REGISTER (INDEX 0Ah) This controls the level for the PC-beep input. Each step corresponds to approximately 3dB of attenuation. The MSB of the register is the mute bit. When this bit is set to 1 the level for that channel is set at - ∞dB. WM9708 defaults to the PC-beep path being muted, except during reset when the path is open, so an external speaker should be provided within the PC to alert the user to power on self-test problems. MUTE PV3...PV0 FUNCTION 0 0000 0dB attenuation 0 1111 45dB attenuation 1 xxxx ∞dB attenuation Table 5 PC-beep Register Function ANALOGUE MIXER INPUT GAIN REGISTERS (INDEX 0Ch - 18h AND 72h) This controls the gain/attenuation for each of the analogue inputs and mixer PGA. Each step corresponds to approximately 1.5dB. The MSB of the register is the mute bit. When this bit is set to 1 the level for that channel is set at - ∞dB. REGISTER 0Eh (MIC VOLUME REGISTER) This has an extra bit that is for a 20dB boost. When bit 6 is set to 1 the 20dB boost is on. The default value is 8008h, which corresponds to 0dB gain with mute on. The default value for the mono registers is 8008h, which corresponds to 0dB gain with mute on. The default value for stereo registers is 8808h, which corresponds to 0dB gain with mute on. MUTE GX4...GX0 FUNCTION 0 00000 +12dB gain 0 01000 0dB gain 0 11111 -34.5dB gain 1 xxxxx - ∞dB gain Table 6 Mixer Gain Control Register Function RECORD SELECT CONTROL REGISTER (INDEX 1Ah) Used to select the record source independently for right and left (see Table 7). The default value is 0000h, which corresponds to Mic in. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |