| 数据搜索系统,热门电子元器件搜索 |
|
STM6600AS24DM6F 数据表(PDF) 5 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM6600AS24DM6F 数据表(HTML) 5 Page - STMicroelectronics |
|
5 / 51 page ![]() STM6600 - STM6601 Description Doc ID 15453 Rev 7 5/51 1 Description The STM6600-01 devices monitor the state of connected push-button(s) as well as sufficient supply voltage. An enable output controls power for the application through the MOSFET transistor, DC-DC converter, regulator, etc. If the supply voltage is above a precise voltage threshold, the enable output can be asserted by a simple press of the button. Factory- selectable supply voltage thresholds are determined by highly accurate and temperature- compensated references. An interrupt is asserted by pressing the push-button during normal operation and can be used to request a system power-down. The interrupt is also asserted if undervoltage is detected. By a long push of one button (PB) or two buttons (PB and SR) either a reset is asserted or power for the application is disabled depending on the option used. The device also offers additional features such as precise 1.5 V voltage reference with very tight accuracy of 1%, separate output indicating undervoltage detection and separate output for distinguishing between interrupt by push-button or undervoltage. The device consumes very low current of 6 µA during normal operation and only 1 µA current during standby. The STM6600-01 is available in the TDFN12 package and is offered in several options among features such as selectable threshold, hysteresis, timeouts, output types, etc. (see Table 8 and Table 9 for more information). Figure 1. Application hookup 1. A resistor is required for open drain output type only. A 10 k Ω pull-up is sufficient in most applications. 2. Capacitor CREF is mandatory on VREF output (even if VREF is not used). Capacitor value of 1 µF is recommended. 3. For the STM6601 the processor has to confirm the proper power-on during the fixed time period, tON_BLANK. This failsafe feature prevents the user from turning on the system when there is a faulty power switch or an unresponsive microprocessor. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |