PIC16F526-ISLASHP datasheet(71/122 Pages) MICROCHIP

71 / 122 page

 2010 Microchip Technology Inc.

DS41326D-page 71

PIC16F526

12.0 INSTRUCTION SET SUMMARY

The PIC16 instruction set is highly orthogonal and is

comprised of three basic categories.

• Byte-oriented operations

• Bit-oriented operations

• Literal and control operations

Each PIC16 instruction is a 12-bit word divided into an

opcode, which specifies the instruction type, and one

or more operands which further specify the operation

of the instruction. The formats for each of the

categories is presented in Figure 12-1, while the

various opcode fields are summarized in Table 12-1.

For byte-oriented instructions, ‘f’ represents a file

designator. The file register designator specifies which

file register is to be used by the instruction.

The destination designator specifies where the result of

the operation is to be placed. If ‘d’ is ‘0’, the result is

placed in the W register. If ‘d’ is ‘1’, the result is placed

in the file register specified in the instruction.

For bit-oriented instructions, ‘b’ represents a bit field

designator which selects the number of the bit affected

by the operation, while ‘f’ represents the number of the

file in which the bit is located.

For literal and control operations, ‘k’ represents an

8 or 9-bit constant or literal value.

TABLE 12-1:

OPCODE FIELD

DESCRIPTIONS

All instructions are executed within a single instruction

cycle, unless a conditional test is true or the program

counter is changed as a result of an instruction. In this

case, the execution takes two instruction cycles. One

instruction cycle consists of four oscillator periods.

Thus, for an oscillator frequency of 4 MHz, the normal

instruction execution time is 1

s. If a conditional test is

true or the program counter is changed as a result of an

instruction, the instruction execution time is 2

s.

Figure 12-1 shows the three general formats that the

instructions can have. All examples in the figure use

the following format to represent a hexadecimal

number:

0xhhh

where ‘h’ signifies a hexadecimal digit.

FIGURE 12-1:

GENERAL FORMAT FOR

INSTRUCTIONS

Field

Description

Working register (accumulator)

Bit address within an 8-bit file register

Literal field, constant data or label

Don’t care location (= 0 or 1)

The assembler will generate code with x = 0. It is

the recommended form of use for compatibility with

all Microchip software tools.

Destination select;

d = 0 (store result in W)

d = 1 (store result in file register ‘f’)

Default is d = 1

label

Label name

TOS

Top-of-Stack

Program Counter

WDT

Watchdog Timer counter

Time-out bit

Power-down bit

dest

Destination, either the W register or the specified

[

]

Options

(

)

Contents

Assigned to

< >

In the set of

italics

User defined term (font is courier)

Byte-oriented file register operations

d = 0 for destination W

OPCODE

f (FILE #)

d = 1 for destination f

f = 5-bit file register address

Bit-oriented file register operations

8 7

5 4

OPCODE

b (BIT #)

f (FILE #)

b = 3-bit bit address

f = 5-bit file register address

Literal and control operations (except GOTO)

OPCODE

k (literal)

k = 8-bit immediate value

Literal and control operations – GOTO instruction

OPCODE

k (literal)

k = 9-bit immediate value

PIC16F526-I/P 数据表(PDF) 71 Page - Microchip Technology

PIC16F526-I/P 数据表(HTML) 71 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

PIC16F526-I/P 数据表(PDF) 71 Page - Microchip Technology

PIC16F526-I/P 数据表(HTML) 71 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载