STM8L15 datasheet(9/122 Pages) STMICROELECTRONICS

9 / 122 page

STM8L151xx, STM8L152xx

Introduction

Doc ID 15962 Rev 5

9/122

Introduction

This document describes the STM8L15xxx family features, pinout, mechanical data and

ordering information. The STM8L15xxx devices are referred to as medium-density devices

in the STM8L15xxx reference manual (RM0031) and in the STM8L Flash programming

manual (PM0054)

For more details on the whole STMicroelectronics ultralow power family please refer to

Section 2.2: Ultralow power continuum on page 12.

For information on the debug module and SWIM (single wire interface module), refer to the

STM8 SWIM communication protocol and debug module user manual (UM0470).For

information on the STM8 core, please refer to the STM8 CPU programming manual

(PM0044).

The STM8L15xxx devices provide the following benefits:

●

Integrated system

–

Up to 32 Kbytes of medium-density embedded Flash program memory

–

1 Kbyte of data EEPROM

–

Internal high speed and low-power low speed RC.

–

Embedded reset

●

Ultralow power consumption

–

195 µA/MHZ + 440 µA (dynamic consumption)

–

0.9 µA with LSI in Active-halt mode

–

Clock gated system and optimized power management

–

Capability to execute from RAM for Low power wait mode and Low power run

mode

●

Advanced features

–

Up to 16 MIPS at 16 MHz CPU clock frequency

–

Direct memory access (DMA) for memory-to-memory or peripheral-to-memory

access.

●

Short development cycles

–

Application scalability across a common family product architecture with

compatible pinout, memory map and modular peripherals.

–

Wide choice of development tools

All devices offer 12-bit ADC, DAC, two comparators, Real-time clock three 16-bit timers, one

8-bit timer as well as standard communication interface such as SPI, I2C and USART. A

4x28-segment LCD is available on the STM8L152xx line. Table 2: STM8L15x low power

device features and peripheral counts and Section 3 on page 13 give an overview of the

complete range of peripherals proposed in this family.

The STM8L15xxx microcontroller family is suitable for a wide range of applications:

●

Medical and handheld equipment

●

Application control and user interface

●

PC peripherals, gaming, GPS and sport equipment

●

Alarm systems, wired and wireless sensors

Figure 1 on page 13 shows the general block diagram of the device family.

STM8L15 数据表(PDF) 9 Page - STMicroelectronics

STM8L15 数据表(HTML) 9 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载