 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
MIC3003GML 数据表(PDF) 67 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
MIC3003GML 数据表(HTML) 67 Page - Micrel Semiconductor |
|
|
67 / 75 page  Micrel, Inc. MIC3003 November 2009 67 M9999-111209-C hbwhelp@micrel.com or (408) 955-1690 Modulation DAC Setting (MODDAC) Current VMOD Setting D[7] read-only D[6] read-only D[5] read-only D[4] read-only D[3] read-only D[2] read-only D[1] read-only D[0] read-only Default value 0000 0000b = 00h Serial address A6h Byte address 21 = 15h This register reflects (reads back) the value set in the being sent to the modulation DAC (MODSET0, MODSET1, or MODSET2 whichever is selected, with temperature compensation applied). A valid OEM password is required for access to this register. OEM Readback Register (OEMRD) D[7] Reserved read-only D[6] KILL_LASER read-only D[5] RXP_FLT Read-only D[4] INT read-only D[3] APCSAT read-only D[2] IBFLT read-only D[1] TXFLT read-only D[0] RRSOUT read-only Default value 0000 0000b = 00h Serial address A6h Byte address 22 = 16h This register reflects (reads back) the status of the bits corresponding to the parameters defined below. A valid OEM password is required for access to this register. Bit Function Operation D[7] Reserved Always reads as a zero D[6] KILL_LASER State of the internal laser disable signal 0: The MIC3003 is disabling the laser 1: The laser is enabled to operate D[5] RXP_FLT Registered Fault Comparator detection of a receive power fault 0: No Fault Comparator receive power fault 1: The Fault Comparator has detected a receive power fault D[4] INT Mirrors state of /INT but active- high 1 = The interrupt is asserted 0 = No pending interrupt. D[3] APCSAT Registered APC saturation fault 1 = APC saturation fault detected 0 = Normal operation. D[2] IBFLT Registered Fault Comparator detection of an IBIAS fault 1 = IBIAS fault detected 0 = Normal operation D[1] TXFLT Registered Fault Comparator detection of a transmit power fault 1 = Registered transmit power fault 0 = normal operation D[0] TRSOUT State of the rate select output pin, TRSOUT 1 = high; 0 = low |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
