 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
TNETX3190 数据表(PDF) 11 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TNETX3190 数据表(HTML) 11 Page - Texas Instruments |
|
|
11 / 66 page  TNETX3190 ThunderSWITCH ™ 16/3 ETHERNET™ SWITCH WITH 16 10-MBIT/S PORTS AND 3 10-/100-MBIT/S PORTS SPWS046B – FEBRUARY 1998 – REVISED APRIL 1999 11 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Terminal Functions (Continued) serial MII management PHY interface TERMINAL I/O INTERNAL DESCRIPTION NAME NO. I/O RESISTOR DESCRIPTION MDCLK 121 O/High Z Pullup Serial MII management data clock. MDCLK can be disabled (high impedance) through the use of the SIO register. MDIO 120 I/O Pullup Serial MII management data I/O. MDIO can be disabled, placed in high Z, through the SIO register. An external 4.7-k Ω pullup resistor, conected to VDD(3.3V), is needed to meet the rise-time requirements. MRESET 119 O/High Z Pullup Serial MII management reset. MRESET can be disabled (high impedance) through the use of the SIO register. If connected to a PHY device, an external pullup resistor is recommended. EEPROM interface TERMINAL I/O INTERNAL DESCRIPTION NAME NO. I/O RESISTOR DESCRIPTION ECLK 117 O None EEPROM data clock. EDIO 116 I/O Pullup EEPROM data I/O. An external pulldown resistor may be required for proper operation. Since this terminal has an internal pullup, it can be left unconnected if no EEPROM is present. The EEPROM is optional if a management CPU is present. LED interface TERMINAL I/O INTERNAL DESCRIPTION NAME NO. I/O RESISTOR DESCRIPTION LEDCLK 113 O None LED clock (serial shift clock for the LED status data) LEDDATA 114 O None LED data (serial LED status data). LEDDATA is active low. All LED information (port link, activity status, software status, flow status, and fault status) is sent via this serial interface. JTAG interface TERMINAL I/O INTERNAL DESCRIPTION NAME NO. I/O RESISTOR DESCRIPTION TCLK 106 I Pullup Test clock. TCLK is used to clock state information, test instructions, and test data into and out of the device during operation of the test port. TDI 110 I Pullup Test data input. TDI is used to serially shift test data and test instructions into the device during operation of the test port. An internal pullup resistor is provided on TDI to ensure JTAG compliance. TDO 108 O None Test data output. TDO is used to serially shift test data and test instructions out of the device during operation of the test port. TRST 111 I Pullup Test reset. TRST is used for asynchronous reset of the test-port controller. An internal pullup resistor is provided to ensure JTAG compliance. If the test port is not used, an external pulldown resistor of 10 k Ω may be used to disable the test-port controller. TMS 107 I Pullup Test mode select. TMS is used to control the state of the test-port controller. An internal pullup resistor is provided on TMS to ensure JTAG compliance. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
