LRIS64K datasheet(53/100 Pages) STMICROELECTRONICS

53 / 100 page

LRIS64K

Timing definition

Doc ID 15336 Rev 11

53/100

Timing definition

23.1

t1: LRIS64K response delay

Upon detection of the rising edge of the EOF received from the VCD, the LRIS64K waits for

a time t1nom before transmitting its response to a VCD request or before switching to the

next slot during an inventory process. Values of t1 are given in Table 26. The EOF is defined

in Figure 11 on page 26.

23.2

t2: VCD new request delay

t2 is the time after which the VCD may send an EOF to switch to the next slot when one or

more LRIS64K responses have been received during an Inventory command. It starts from

the reception of the EOF from the LRIS64Ks.

The EOF sent by the VCD may be either 10% or 100% modulated regardless of the

modulation index used for transmitting the VCD request to the LRIS64K.

t2 is also the time after which the VCD may send a new request to the LRIS64K as

described in Table 37: LRIS64K protocol timing.

Values of t2 are given in Table 26.

23.3

t3: VCD new request delay in the absence of a response from

the LRIS64K

t3 is the time after which the VCD may send an EOF to switch to the next slot when no

LRIS64K response has been received.

The EOF sent by the VCD may be either 10% or 100% modulated regardless of the

modulation index used for transmitting the VCD request to the LRIS64K.

From the time the VCD has generated the rising edge of an EOF:

●

If this EOF is 100% modulated, the VCD waits a time at least equal to t3min before

sending a new EOF.

●

If this EOF is 10% modulated, the VCD waits a time at least equal to the sum of t3min +

the LRIS64K nominal response time (which depends on the LRIS64K data rate and

subcarrier modulation mode) before sending a new EOF.

Table 26.

Timing values(1)

The tolerance of specific timings is ± 32/fC.

Minimum (min) values

Nominal (nom) values

Maximum (max) values

318.6 µs

320.9 µs

323.3 µs

309.2 µsNo tnom

No tmax

t1max

(2) + t

SOF

(3)

t1max does not apply for write alike requests. Timing conditions for write alike requests are defined in the

command description.

tSOF is the time taken by the LRIS64K to transmit an SOF to the VCD. tSOF depends on the current data

rate: High data rate or Low data rate.

No tnom

No tmax

LRIS64K 数据表(PDF) 53 Page - STMicroelectronics

LRIS64K 数据表(HTML) 53 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

数据表下载