SMB117 datasheet(29/32 Pages) SUMMIT

29 / 32 page

SMB113A/B/SMB117/A

Preliminary Information

Summit Microelectronics, Inc

2111 2.6 9/16/2010

2C PROGRAMMING INFORMATION (CONTINUED)

GRAPHICAL USER INTERFACE (GUI)

Device configuration utilizing the Windows based

SMB113A/B/117/A graphical user interface (GUI) is

highly recommended. The software is available from

the Summit website (http://www.summitmicro.com ).

Using the GUI in conjunction with this datasheet,

simplifies the process of device prototyping and the

interaction of the various functional blocks. A

programming Dongle (SMX3200) is available from

Summit to communicate with the SMB113A/B and

SMB117/A. The Dongle connects directly to the

parallel port of a PC and programs the device through

a cable using the I

2C bus protocol. See figure 11 and

the SMX3200 Data Sheet.

Slave

Address

0000000BIN

1111111BIN

Configuration Registers are located in

00 HEX thru 9FHEX

General-Purpose Memory Block 0 is

located in A0 HEX thru BFHEX

General-Purpose Memory Block 1 is

located in C0 HEX thru FFHEX

Table 1 – Possible address bytes used by the SMB113A/B and the SMB117/A.

SMB117 数据表(PDF) 29 Page - Summit Microelectronics, Inc.