TTP/C-C2 Communication Controller – Preliminary Data Sheet

AS8202

Rev. 1.0, October 2000

Page 10 of 10

Test Interface

The Test Interface supports the manufacturing test and characterisation of the chip. In the

application environment test pins and special pins have to be connected as following:

test_se, stest, ftest, fidis, mtest, Vpp : connect to Vss

Tmr : connect to Vdd

Tm0, Tm1 : do not connect

Warning:

Any other connection of this pins may cause permanent damage to the device.

LED Signals

The LED signals can be used as a universal output port. The driver strength of the LED ports is

4mA. Note that the pins can be configured as special-function host interface pins (see the Host

Interface section for more details).

Ordering Information

Part Number:

AS8202

Part Name:

TTP/C-C2 Communication Controller

Package:

TQFP 80

Support

Software tools, hardware development boards, evaluation systems and extensive support on

TTP system integration as well as consulting is provided by:

TTTech Computertechnik AG

Time-Triggered Technology

and

TTChip GmbH – a TTTech Company

Schoenbrunnerstrasse 7

A1040 Vienna

Austria

Voice: +43 1 5853434 - 0

Fax:

+43 1 5853434 - 90

email: office@tttech.com

web:

http://www.tttech.com

holders.

Copyright

© 2000 TTTech Computertechnik AG

Copyright

© 2000, Austria Mikro Systeme International AG, Schloß Premstätten, 8141 Unterpremstätten, Austria.

Telefon +43-(0)3136-500-0, Telefax +43-(0)3136-52501, E-Mail info@amsint.com

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any

means, without the prior permission in writing by the copyright holder. To the best of its knowledge, Austria Mikro Systeme

International asserts that the information contained in this publication is accurate and correct.