MPC8315CVRADDA datasheet(97/106 Pages) FREESCALE

97 / 106 page

MPC8315E PowerQUICC II Pro Processor Hardware Specifications, Rev. 2

Freescale Semiconductor

Thermal

25.2.3

Experimental Determination of Junction Temperature

To determine the junction temperature of the device in the application after prototypes are available, the

Thermal Characterization Parameter (



JT) can be used to determine the junction temperature with a

measurement of the temperature at the top center of the package case using the following equation:

TJ = TT + (JT  PD)

where:

TJ = junction temperature (C)

TT = thermocouple temperature on top of package (C)



JT = junction to ambient thermal resistance (C/W)

PD = power dissipation in the package (W)

The thermal characterization parameter is measured per JESD51-2 specification using a 40 gauge type T

thermocouple epoxied to the top center of the package case. The thermocouple should be positioned so

that the thermocouple junction rests on the package. A small amount of epoxy is placed over the

thermocouple junction and over about 1 mm of wire extending from the junction. The thermocouple wire

is placed flat against the package case to avoid measurement errors caused by cooling effects of the

thermocouple wire.

25.2.4

Heat Sinks and Junction-to-Case Thermal Resistance

In some application environments, a heat sink is required to provide the necessary thermal management of

the device. When a heat sink is used, the thermal resistance is expressed as the sum of a junction to case

thermal resistance and a case to ambient thermal resistance:

RJA = RJC + RCA

where:

RJA = junction to ambient thermal resistance (C/W)

RJC = junction to case thermal resistance (C/W)

RCA = case to ambient thermal resistance (C/W)

RJC is device related and cannot be influenced by the user. The user controls the thermal environment to

change the case to ambient thermal resistance, RCA. For instance, the user can change the size of the heat

sink, the air flow around the device, the interface material, the mounting arrangement on printed circuit

board, or change the thermal dissipation on the printed circuit board surrounding the device.

To illustrate the thermal performance of the devices with heat sinks, the thermal performance has been

simulated with a few commercially available heat sinks. The heat sink choice is determined by the

application environment (temperature, air flow, adjacent component power dissipation) and the physical

space available. Because there is not a standard application environment, a standard heat sink is not

required.

MPC8315CVRADDA 数据表(PDF) 97 Page - Freescale Semiconductor, Inc

MPC8315CVRADDA 数据表(HTML) 97 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载