COMBOSMARTMETER datasheet(2/60 Pages) TI1

2 / 60 page

ADS131E04

ADS131E06

ADS131E08

SBAS561A – JUNE 2012 – REVISED APRIL 2013

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

FAMILY AND ORDERING INFORMATION(1)

OPERATING

NUMBER OF

MAXIMUM SAMPLE

TEMPERATURE

PRODUCT

PACKAGE OPTION

CHANNELS

ACCURACY

RATE (kSPS)

RANGE

ADS130E08

TQFP-64

Class 1.0

–40°C to +105°C

ADS131E04

TQFP-64

Class 0.1

–40°C to +105°C

ADS131E06

TQFP-64

Class 0.1

–40°C to +105°C

ADS131E08

TQFP-64

Class 0.1

–40°C to +105°C

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the

device product folder at www.ti.com.

ABSOLUTE MAXIMUM RATINGS

(1)

Over operating free-air temperature range, unless otherwise noted.

VALUE

UNIT

AVDD to AVSS

–0.3 to +5.5

DVDD to DGND

–0.3 to +3.9

Analog input to AVSS

AVSS – 0.3 to AVDD + 0.3

Digital input to DVDD

DGND – 0.3 to DVDD + 0.3

Input current to any pin except supply pins(2)

±10

Momentary

±100

Input current

Continuous

±10

Operating, industrial-grade devices only

–40 to +85

°C

Temperature

Storage

–60 to +150

°C

Maximum junction, TJ

+150

°C

Human body model (HBM)

±1000

JEDEC standard 22, test method A114-C.01, all pins

Electrostatic discharge

(ESD) ratings

Charged device model (CDM)

±500

JEDEC standard 22, test method C101, all pins

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied.

(2)

Input terminals are diode-clamped to the power-supply rails. Input signals that can swing beyond the supply rails must be current limited

to 10 mA or less.

Submit Documentation Feedback

Product Folder Links: ADS131E04 ADS131E06 ADS131E08

COMBOSMARTMETER 数据表(PDF) 2 Page - Texas Instruments

COMBOSMARTMETER 数据表(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

数据表下载

链接网址

COMBOSMARTMETER 数据表(PDF) 2 Page - Texas Instruments

COMBOSMARTMETER 数据表(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

数据表 下载

链接网址

数据表下载