| 数据搜索系统,热门电子元器件搜索 |
|
ICS1523MLF 数据表(PDF) 1 Page - Integrated Circuit Systems |
|
|
|||||||||||||||||||||||||||||
ICS1523MLF 数据表(HTML) 1 Page - Integrated Circuit Systems |
|
1 / 21 page ![]() MDS 1523 Y 1 Revision 110905 Integrated Circuit Systems 525 Race Street, San Jose, CA 95126 tel (408) 297-1201 www.icst.com Video Clock Synthesizer with I2C Programmable Delay ICS1523 Features • Low Jitter • Wide input frequency range • 15.734 kHz to 100 MHz • PECL differential outputs • Up to 250 MHz • SSTL_3 Single-ended clock outputs • Up to 150 MHz • Dynamic Phase Adjust (DPA) for all outputs • I2C controlled phase adjustment • Full clock cycle down to 1/64 of a clock • Double-buffered control registers • External or internal loop filter selection • COAST input can disable charge pump • 3.3 VDD • 5 volt Tolerant Inputs • Industry Standard I2C-bus programming interface • PLL Lock detection via I2C or LOCK/REF output pin • 24-pin 300-mil SOIC package • Available in Pb-free packaging Applications • Frequency synthesis • LCD monitors, video projectors and plasma displays • Genlocking multiple video subsystems Pin Configuration 24-pin SOIC General Description The ICS1523 is a low-cost, high-performance frequency generator. It is well suited to general purpose phase controlled clock synthesis as well as line-locked and genlocked high-resolution video applications. Using ICS’s advanced low-voltage CMOS mixed-mode technology, the ICS1523 is an effective phase controlled clock synthesizer and also supports video projectors and displays at resolutions from VGA to beyond UXGA. The ICS1523 offers clock outputs in both differential (to 250 MHz) and single-ended (to 150 MHz) formats. Dynamic Phase Adjust (DPA) allows I2C™ control of the output clock’s phase relative to the input sync signal. A second, half speed set of outputs that can be separately enabled allows such applications as clocking analog-to-digital converters. The FUNC pin provides either the regenerated input from the phase-locked loop (PLL) divider chain output, or the input HSYNC after being sharpened by the Schmitt trigger. Both signals are then delayed by the DPA. The advanced PLL uses either its internal programmable feedback divider or an external divider. Either the internal or external loop filters is software selectable. The COAST input pin disables the PLL’s charge pump, causing the device to idle at the current speed for short periods of time, such as vertical blanking intervals. The device is programmed by a standard I2C-bus serial interface and is available in a 24-pin, wide small-outline integrated circuit (SOIC) package. ICS1523 Functional Diagram OSC External Loop Filter (optional) CLK/2 FUNC CLK I C I/F 2 HSYNC |
类似零件编号 - ICS1523MLF |
|
类似说明 - ICS1523MLF |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |