ams Datasheet

Page 5

[v1-02] 2014-Oct-29

Document Feedback

AS5601 − Electrical Characteristics

All limits are guaranteed. The parameters with min and max

values are guaranteed with production tests or SQC (Statistical

Quality Control) methods.

Operating Conditions

Figure 6:

System Electrical Characteristics and Temperature Range

Note(s) and/or Footnote(s):

1. For typical magnetic field (60 mT) excluding current delivered to the external load and tolerance on polling times.

2. For OTP burn procedure the supply line source resistance should not exceed 1Ohm.

Symbol

Parameter

Conditions

Min

Typ

Max

Units

VDD5V

Positive supply voltage in

5.0V mode

5.0V operation mode

4.5

5.0

5.5

V

During OTP burn procedure(2)

VDD3V3

Positive supply voltage in

3.3V mode

3.3V operation mode

3.0

3.3

3.6

V

During OTP burn procedure(2)

3.3

3.4

3.5

V

IDD

Supply current in NOM (1)

PM = 00 Always on

6.5

mA

lDD_LPM1

Supply current in LPM1 (1)

PM = 01

Polling time = 5 ms

3.4

mA

lDD_ LPM2

Supply current in LPM2 (1)

PM = 10

Polling time = 20 ms

1.8

mA

lDD_ LPM3

Supply current in LPM3 (1)

PM = 11

Polling time = 100 ms

1.5

mA

IDD_BURN

Supply current per bit for

burn procedure

Initial peak, 1 μs

100

mA

Steady burning, <30 μs

40

mA

Operating temperature

-40

+125

°C

Programming

temperature

20

30

°C

Electrical Characteristics