USB5533B datasheet(27/71 Pages) MICROCHIP

27 / 71 page

 2012 - 2015 Microchip Technology Inc.

DS00001680C-page 27

USB5533B

5.2.10

USB HUB MAX CURRENT

This field is the maximum current of the hub and system components to support the hub on VBUS.

5.2.11

USB LANGUAGE ID

This field selects the USB language ID.

5.2.12

USB MANUFACTURER STRING

This field contains the manufacturer string reported by both USB 2.0 and USB 3.0 hubs (maximum of 30 characters).

5.2.13

USB 2.0 PRODUCT STRING

This field contains the product string reported by the USB 2.0 hub (maximum of 30 characters).

5.2.14

USB 3.0 PRODUCT STRING

This field contains the product string reported by the USB 3.0 hub (maximum of 30 characters).

5.2.15

USB SERIAL STRING

This field contains the serial string reported by the USB 2.0 and USB 3.0 hubs (maximum of 30 characters).

5.2.16

PIN STRAP DISABLES

This setting disables the external pin configuration straps on power-up that select the following on ports 1-4:

• Port Disable

• Port Non-Removable

• Battery Charging Enable

If the user needs to select the above settings in a configuration file for ports 1-4, they must also disable the pin straps

to ensure the settings are not overridden by the strap controls.

5.2.17

PORT POWER/OCS CONTROL

5.2.17.1

Per-Port PWR/OCS Combined Mode

This per-port setting controls whether the Power Enable and OCS signals are on the same pin. This setting is only valid

for ports 1-4.

Refer to Section 4.4, "Standard Port Power Configuration," on page 20 for additional port power setting details and con-

nection diagrams.

5.2.17.2

OCS Gang Control

This setting can gang multiple ports into an OCS ganging to report overcurrent on any port in this gang.

ALL GANGED

This single setting configures all ports into an OCS gang.

SPLIT GANGED

This setting allows the user to gang select ports together while not ganging others.

Requires the setting of the following:

• USB 2.0 hub OCS gang set

• USB 3.0 hub OCS gang set

• Ports contained within the OCS gang (any other ports will operate as a per-port power control/ocs)

• GPIO used as OCS Gang input

5.2.17.3

USB Port Power Gang Control

This setting can gang all ports into single Port Power control.

USB5533B 数据表(PDF) 27 Page - Microchip Technology

USB5533B 数据表(HTML) 27 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表下载